EM Test CWS 500N1 Continuous Wave Simulator

Output

• Output Level: 1 V - max. 30 V (emf) all standard test levels are guaranteed with all coupling methods
• Output PowerL 80 W (49 dBm) at 1 dB compression
• Output Impedance: 50 ohm
• Harmonic Distortion: < -20 dBc at max. power
• Amplifier Gain: 48 dB
• Output Impedance: 50 ohm
• Direct RF Output: N connector (on front panel)

Test Frequencies

• Sinus (CW): 10 kHz to 400 MHz
• Unmodulated Signal: CW (continuous wave)
• Amplitude Modulation: 1 kHz, 80 % AM per IEC 61000-4-6; 2 Hz, 80 % AM per IEC 60601-1-2; 400 Hz, 80 % AM
• Pulse Modulation: 1Hz, 50% duty cycle per EN 50130-4

Measurements

• Monitor: Integrated RF power meter, measuring input for CDN and clamp calibration as well as current monitor for clamp applications
• RF Indicator: LED indicating the RF output status
• LCD: Online display of the test level and the preselected frequency value
• Cal Data F1 - F5: 5 internal memories to save calibration data, 1% step width as required by the standards

Time Parameters

• Dwell Time for CW & AM: td = 0.3s to 9,999s
• Dwell Time for PM: td = 3s to 9,999s
• Pause Time: tr = 0/0.3s to 9,999s

Test Routines

• Quick Start: Immediate test start
• User Test Routines: Voltage sweep, frequency sweep, dwell time sweep
• Standard Test Routines: Level 1 to Level 3 (IEC 61000-4-6); Automatic Level X to Level Y
• Cal Procedure: Calibration of the complete test set up, calibration data saved in internal memory

General Data

• Dimensions: 19"/3 HU
• Weight: Approx. 17 kg
• Supply Voltage: 115 V to 230 V +10/-15 %, 50/60 Hz
• Input Power: Max. 380 W
• Power Factor: cos (phi) = 0.98 at max. output power as per IEC 555
• Fuses: 2 x 6.3 AT (115 V) or 2 x 3.15 AT (230 V)
• Cooling: Active cooling, air ventilation
• Temperature: 10° C to 35° C
• Rel. Humidity: Max. 85 %, non condensing
• Atmospheric Pressure: 86 kPa (860 mbar) to 106 kPa (1,060 mbar)

EM Test CWS 500N1 Continuous Wave Simulator Data Sheet