Close
You have no items in your shopping cart.
Search

Fluke 199C-S Color ScopeMeter®

Manufacturer part number: 199C-S
2 Channels, 200 MHz, 2.5 GS/s
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

Whether you are performing routine maintenance and calibration or troubleshooting the hardest to solve problems like intermittent failures or sources of unwanted noise, the Fluke 199C-S Color ScopeMeter 2 Ch, 200 MHz, 2.5 GS/s with Software has all the tools needed to get the job done.

With 200 MHz bandwidth, up to 2.5 GS/s real-time sampling rate, 27500 points memory for high-resolution waveform per input they're ideal for engineers who need the full capabilities of a high-performance oscilloscope in a handheld, battery-powered instrument. This model has a high-resolution color display that has a fast update rate, waveform pass/fail testing, and a digital persistence mode.

Key Features and Functions

  • Dual-input - 200 MHz bandwidth
  • Up to 2.5 GS/s real-time sampling per input
  • High waveform resolution of 3,000 data points per channel
  • Automatic and advanced triggering functions - Connect-and-View™, pulse width, dual slope and n-cycle for synchronizing on specific waveform details
  • Fast Fourier Transform (FFT) for frequency domain, spectrum display of signal harmonics or fidelity.
  • Digital Persistence for analyzing complex dynamic waveforms like on an analog scope
  • Fast display update rate for seeing dynamic behavior instantaneously
  • Automatic capture and replay of 100 screens
  • 27,500 points per input record length using ScopeRecord™ mode
  • TrendPlot™ paperless chart recorder for trend analysis up to 22 days
  • Up to 1000 V independently floating isolated inputs
  • Waveform reference for visual comparisons and automatic pass/fail testing of waveforms
  • Vpwm function for motor drive and frequency inverter applications.
  • 1000 V CAT II and 600 V CAT III safety certified
  • Four hours rechargeable Ni-MH battery pack

Memory Save and Recall

  • Scope memories: 15 memory locations that each can contain two waveforms plus corresponding setup. With each storage action, a user-specified name (20 ASCII characters long) can be assigned to the stored data, for easier reference
  • Recorder memories: 2 memory locations that each can contain 100 captured dual input scope screens, or a dual input ScopeRecord (27,500 Min-Max pairs per input), or a dual input Trendplot (18,000 min-max pairs + average values)

Case

  • Design: Rugged, shockproof with integrated protective holster
  • Drip and Dust Proof: IP51 according to ot IEC529
  • Shock and Vibration: Shock 30g, Vibration (sinusoidal) 3g according to MIL-PRF-28800F Class 2
  • Display: Bright full-color LCD with backlight
  • Brightness: 80 Cd/m2 typ. using a power adapter
  • Display size: 115.2 mm x 86.4 mm (4.54 in x 3.4 in); 144 mm (5.67 in) diagonal
  • Resolution: 320 x 240 pixels
  • Contrast and brightness: User adjustable, temperature compensated
  • Brightness: 80 cd/m2 typ. using a power adapter

Power

  • Line power: Country-specific line voltage adapter/battery charger included
  • Battery power: Rechargeable NiMH (installed)
  • Battery operating time: 4 hours
  • Battery charging time: 4 hours
  • Battery power saving functions: Auto power down with adjustable power downtime. On-screen battery status indicator.

Input Voltage Ratings

  • Maximum probe voltage: CAT II 1000 V/ CAT III 600 V (Maximum voltage between 10:1 probe tip [VPS200] and reference lead)
  • Floating voltage: CAT II 1000 V/ CAT III 600 V (Maximum voltage between earth ground and any terminal [signal input or shielding])
  • Independently isolated inputs: CAT II 1000 V/ CAT III 600 V (Maximum voltage between any terminal of one input or probe [VPS200] and any other terminal of another input or probe [VPS200])
  • Maximum voltage on BNC input directly (input A or B): CAT III 300 V
  • Maximum voltage on meter input: CAT II 1,000 V/ CAT III 600 V

Environmental

  • Operating temperature: 0 °C to +50 °C
  • Storage temperature: -20 °C to +60 °C
  • Humidity: 10°C to 30°C: 95% RH non condensing; 30°C to 40°C: 75% RH non condensing; 40°C to 50°C: 45% RH non condensing
  • Maximum operating altitude: 3,000 m (10,000 feet)
  • Maximum storage altitude: 12 km (40,000 feet)
  • Electro-Magnetic-Compatibility (EMC): EN 61326-1 for emission and immunity
  • Size: 256 mm x 169 mm x 64 mm (10.1 in x 6.6 in x 2.5 in)
  • Weight: 2 kg (4.4 lbs)
  • Rechargeable battery pack (installed)
  • Line voltage adapter/battery charger
  • Voltage probes and accessories
  • Multimeter test leads
  • User manual
Description

Whether you are performing routine maintenance and calibration or troubleshooting the hardest to solve problems like intermittent failures or sources of unwanted noise, the Fluke 199C-S Color ScopeMeter 2 Ch, 200 MHz, 2.5 GS/s with Software has all the tools needed to get the job done.

With 200 MHz bandwidth, up to 2.5 GS/s real-time sampling rate, 27500 points memory for high-resolution waveform per input they're ideal for engineers who need the full capabilities of a high-performance oscilloscope in a handheld, battery-powered instrument. This model has a high-resolution color display that has a fast update rate, waveform pass/fail testing, and a digital persistence mode.

Key Features and Functions

  • Dual-input - 200 MHz bandwidth
  • Up to 2.5 GS/s real-time sampling per input
  • High waveform resolution of 3,000 data points per channel
  • Automatic and advanced triggering functions - Connect-and-View™, pulse width, dual slope and n-cycle for synchronizing on specific waveform details
  • Fast Fourier Transform (FFT) for frequency domain, spectrum display of signal harmonics or fidelity.
  • Digital Persistence for analyzing complex dynamic waveforms like on an analog scope
  • Fast display update rate for seeing dynamic behavior instantaneously
  • Automatic capture and replay of 100 screens
  • 27,500 points per input record length using ScopeRecord™ mode
  • TrendPlot™ paperless chart recorder for trend analysis up to 22 days
  • Up to 1000 V independently floating isolated inputs
  • Waveform reference for visual comparisons and automatic pass/fail testing of waveforms
  • Vpwm function for motor drive and frequency inverter applications.
  • 1000 V CAT II and 600 V CAT III safety certified
  • Four hours rechargeable Ni-MH battery pack