Keithley 2612B Dual-Channel System SourceMeter

Manufacturer part number: 2612B

2600B series dual channel system SourceMeter® (SMU) instrument (0.1fA, 10A pulse). It is an industry leading current/voltage source and measure solutions.

PURCHASE

Available	QTY	Price
New: 0	Qty: + -	$0.00
Used: 0	Qty: + -	$0.00	Configurations

Available Configurations

Overview
Specifications
Accessories
Documentation

The 2612B from Keithley is a 2600B series dual channel system SourceMeter® (SMU) instrument (0.1fA, 10A pulse). It is an industry-leading current/voltage source and measure solutions. This dual-channel model combines the capabilities of a precision power supply, true current source, 6 1/2 digit DMM, arbitrary waveform generator, pulse generator and electronic load all into one tightly integrated instrument. The result is a powerful solution that significantly boosts productivity in applications ranging from bench-top I-V characterization through highly automated production test. It has 100mV to 40V voltage, 100nA to 10A current measurement range (source). This is tightly integrated, 4-quadrant voltage/current source and measure instrument which offers best in class performance with 6 1/2digit resolution. Built-in web browser based software enables remote control through any browser, on any computer, from anywhere in the world.

Features:

Compatible with the Keithley IVy mobile app
Unmatched throughput for automated test with TSP (test script processing) technology
Third generation SMU instrument design ensures faster test times
Simplifies semiconductor component test, verification and analysis
Ethernet, IEEE-488, USB 2.0, LXI-C, GPIB, RS-232 and digital I/O interfaces
SMU per pin parallel testing with TSP-Link technology
100V to 250VAC, 50Hz to 60Hz (auto sensing) power supply, 240VA maximum power consumption
Conforms to European union directive 73/23/EEC, EN 61010-1 and UL 61010-1
Perform Quick I-V characterization with Android devices
89mm (H) x 213mm (W) x 460mm dimension, 0° to 50°C operating temperature

IEEE-488: IEEE-488.1 compliant. Supports IEEE-488.2 common commands and status model topology
USB Control (Rear): USB 2.0 device, TMC488 protocol
RS-232: Baud rates from 300 bps to 115200 bps
Ethernet: RJ-45 connector, LXI Class C, 10/100BT, no auto MDIX
Expansion Interface: The TSP-Link expansion interface allows TSP enabled instruments to trigger and communicate with each other
Cable Type: Category 5e or higher LAN crossover cable
Length: 3 meters maximum between each TSP enabled instrument
Connector: 25-pin female D
Input/Output Pins: 14 open drain I/O bits
Absolute Maximum Input Voltage: 5.25 V
Absolute Minimum Input Voltage: -0.25 V
Maximum Logic Low Input Voltage: 0.7 V, +850 μA max
Minimum Logic High Input Voltage: 2.1 V, +570 μA
Maximum Source Current (Flowing Out of Digital I/O Bit) +960 μA
Maximum Sink Current @ Maximum Logic Low Voltage (0.7V): -5.0 mA
Absolute Maximum Sink Current (Flowing into Digital I/O pin): -11 mA
5 V Power Supply Pins: Limited to 250 mA total for all three pins, solid state fuse protected
USB File System (Front): USB 2 Host, mass storage class device
Power Supply: 100 V to 250 VAC, 50–60 Hz (auto sensing), 240 VA max
Cooling: Forced air. Side intake and rear exhaust. One side must be unobstructed when rack mounted.
Dimensions
- Without Handle and Feet: 89 mm high × 213 mm wide × 460 mm deep (3 ½ in × 8 3⁄8 in × 17 ½ in)
- With Handle and Feet (Bench Configuration): 104mm high × 238mm wide × 460mm deep (4 1⁄8 in × 9 3⁄8 in × 17 ½ in)
Weight: 5.50 kg (12 lbs)
Environment: For indoor use only
Altitude: Maximum 2000 meters above sea level.
Operating: 0°–50 °C, 70% R.H. up to 35 °C. Derate 3% R.H./°C, 35°–50 °C
Storage: –25 °C to 65 °C

Operators and Programming Manuals
2600-ALG-2: Low Noise Triax Cable with Alligator Clips, 2m (6.6 ft.) (two supplied with 2634B and 2636B, one with 2635B)
2600-Kit: Screw Terminal Connector Kit (2601B/
2600B-800A: Series 2400 Emulation Script for Series 2600B (supplied on USB memory stick)
7709-308A: Digital I/O Connector
CA-180-3A: TSP-Link/Ethernet
TSP Express Software Tool (embedded)
Test Script Builder Software (supplied on CD)
LabVIEW Driver (supplied on CD)
ACS Basic Edition Software (optional)

Data Sheet

Description

Features:

Compatible with the Keithley IVy mobile app
Unmatched throughput for automated test with TSP (test script processing) technology
Third generation SMU instrument design ensures faster test times
Simplifies semiconductor component test, verification and analysis
Ethernet, IEEE-488, USB 2.0, LXI-C, GPIB, RS-232 and digital I/O interfaces
SMU per pin parallel testing with TSP-Link technology
100V to 250VAC, 50Hz to 60Hz (auto sensing) power supply, 240VA maximum power consumption
Conforms to European union directive 73/23/EEC, EN 61010-1 and UL 61010-1
Perform Quick I-V characterization with Android devices
89mm (H) x 213mm (W) x 460mm dimension, 0° to 50°C operating temperature

Product tags