Close
You have no items in your shopping cart.

A.H. Systems SAS-584 Standard Gain Horn Antenna

Manufacturer part number: SAS-584
5.85 to 8.2GHz
PURCHASE
AvailableQTYPrice
New:   1
+ -
$1,670.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

A.H. Systems SAS-584 Standard Gain Horn Antenna; 5.85 to 8.2GHz

This Standard gain horn antenna has medium gain, low VSWR, and a constant antenna factor; excellent for both immunity and emissions testing.

The A.H. Systems Standard Gain Horn Antennas are designed specifically for utilization in emissions and immunity testing. Each antenna is linearly polarized and has medium gain, low VSWR, and a constant antenna factor. The Standard Gain Horn performance is very precise and predictable through design parameters. Comparisons of measured versus computed antenna factors and gain have been shown to be ±0.5dB; therefore, the antenna is considered to be a standard reference, similar to that of a resonant dipole below 1GHz. The coax-to-waveguide adapter is the only power-limiting component on the antenna and can be removed if high fields are desired. Each Standard Gain Horn comes with a tripod mount that adapts to any tripod with ¼/20 male threads. Horizontal and vertical polarization is obtained by rotating the antenna on the tripod.

  • Frequency Range: 5.85GHz to 8.2GHz
  • Antenna Factor: 32.2dB/m
  • Gain: 14.8dBi
  • Maximum Continuous Power: 250W
  • Max Radiated Field: 500V/m
  • Polarization: Linear
  • Beamwidth, E-Field: 30°
  • Beamwidth, H-Field: 29°
  • VSWR: 1.2:1 (1.5:1 max)
  • Impedance: 50Ω
  • Connector: WR-137 to Type-N(f) adaptor
  • Mounting Base: ¼/20(f)
  • Transmit & Receive
  • Individually Calibrated (1, 3 meter calibration included, horizontal polarization)
  • Corrosion Protection
  • Length: 8.6in (21.8cm)
  • Width: 2.6in (6.6cm)
  • Height: 3.5in (8.89cm)
  • Weight: 1.1lbs (0.5kg)
  • FCC
  • Tempest
  • VDE
Description

A.H. Systems SAS-584 Standard Gain Horn Antenna; 5.85 to 8.2GHz

This Standard gain horn antenna has medium gain, low VSWR, and a constant antenna factor; excellent for both immunity and emissions testing.

The A.H. Systems Standard Gain Horn Antennas are designed specifically for utilization in emissions and immunity testing. Each antenna is linearly polarized and has medium gain, low VSWR, and a constant antenna factor. The Standard Gain Horn performance is very precise and predictable through design parameters. Comparisons of measured versus computed antenna factors and gain have been shown to be ±0.5dB; therefore, the antenna is considered to be a standard reference, similar to that of a resonant dipole below 1GHz. The coax-to-waveguide adapter is the only power-limiting component on the antenna and can be removed if high fields are desired. Each Standard Gain Horn comes with a tripod mount that adapts to any tripod with ¼/20 male threads. Horizontal and vertical polarization is obtained by rotating the antenna on the tripod.