Close
You have no items in your shopping cart.
Search

Amplifier Research 100W1000M1 Amplifier

Manufacturer part number: 100W1000M1
1000 MHz, 100W
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

The Model 100W1000B is a portable, self-contained, air-cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth, high gain, and linearity are required. Push-pull circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability. The Model 100W1000B, when used with a sweep generator, will provide a minimum of 100 watts of RF power.

The Model 100W1000B is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. The DCP uses a digital display, menu assigned softkeys, a single rotary knob, and four dedicated switches (POWER, STANDBY, OPERATE, and FAULT/RESET) to offer extensive control and status reporting capability.

The display provides an operational presentation of Forward Power and Reflected Power plus control status and reports of internal amplifier status. Special features include a gain control, internal/external automatic level control (ALC) with front panel control of the ALC threshold, pulse input capability, and RF output level protection. Also included is an internal RF detector which provides an output for use in self-testing or operational modes. Protection is provided by DC current level sensing and individual fusing of all output stages.

  • Power Output, CW: Typical: 130W, Minimum: 100W
  • Power Output, CW Linear (less than 1 dB compression into 50 Ohms): 60W Minimum
  • Flatness:± 2.0 dB maximum, ± 1.5 dB typical, ± 0.8 dB with internal leveling
  • Frequency Response: 80 to 1000 MHz
  • Input for rated output: 1 mw max: Power Gain (at max): 50 dB Min.
  • Gain Control Range: 18 dB Min
  • Input Impedance: 50 Ohms; VSWR 2.0:1 max
  • Output Impedance: 50 Ohms nominal; VSWR 2.5:1 max
Description

The Model 100W1000B is a portable, self-contained, air-cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth, high gain, and linearity are required. Push-pull circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability. The Model 100W1000B, when used with a sweep generator, will provide a minimum of 100 watts of RF power.

The Model 100W1000B is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. The DCP uses a digital display, menu assigned softkeys, a single rotary knob, and four dedicated switches (POWER, STANDBY, OPERATE, and FAULT/RESET) to offer extensive control and status reporting capability.

The display provides an operational presentation of Forward Power and Reflected Power plus control status and reports of internal amplifier status. Special features include a gain control, internal/external automatic level control (ALC) with front panel control of the ALC threshold, pulse input capability, and RF output level protection. Also included is an internal RF detector which provides an output for use in self-testing or operational modes. Protection is provided by DC current level sensing and individual fusing of all output stages.