Close
You have no items in your shopping cart.
Search

Amplifier Research 150W1000B Broadband Amplifier, 150 Watt CW, 80 - 1000 MHz

Manufacturer part number: 150W1000B
$0.00
The Model 150W1000B is a solid-state, self contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. Available in a stylish, contemporary cabinet for benchtop use or with cabinet removed for rack mounting.
+ -
X

Available Configurations

150 WATT CW, 80 - 1000 MHZ BROADBAND AMPLIFIER
30018141
$0

The Model 150W1000B, when used with a sweep generator, will provide 150 watts of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The 150W1000B is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0dBm. The RF amplifier stages are protected from overtemperature by removing the DC voltage to them if an over-temperature condition occurs due to cooling blockage or fan failure. The 150W1000B is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. The DCP uses a color LCD touch screen display to indicate the operate status and fault conditions if an over-temperature or power supply fault has occurred. The unit can be returned to operate when the condition has been cleared.

  • Rated Output Power: 160 watts typical, 130 watts minimum
  • Input For Rated Output: 1.0 mW Max
  • Power Output @ 3dB Compression: 150 watts typical, 125 watts minimum
  • Power Output @ 1dB Compression: 125 watts typical, 100 watts minimum
  • Flatness: ±1.5 dB typical, ±2.0 dB maximum
  • Frequency Response: 80 MHz - 10000 MHz instantaneously
  • Gain (at maximum setting) 52 dB minimum
  • Gain Adjustment (continuous range): 20 dB minimum
  • Input Impedance: 50 ohms, VSWR 1.5:1 maximum
  • Output Impedance: 50 ohms nominal
  • Mismatch Tolerance: 100% of rated power without foldback. Will operate without damage or oscillation with any magnitude and phase of source and load impedance.
  • Modulation Capabililty: Will faithfully reproduce AM, FM or Pulse modulation appearing on input signal
  • Third Order Intercept: 58 dBm typical
  • Noise Figure: 8 dB max; 6 dB typical
  • Harmonic Distortion: Minus 20 dBc maximum at 100 watts; minus 30 dBc typical at 100 watts
  • Spurious: Minus 73 dBc typical
  • Primary Power: 100-240 VAC, 50/60 Hz, 650 watts
  • Connectors: RF Input N female; RF Output N female
  • Cooling: Forced Air (self contained fans)
  • Weight: 36.7 kg (81 lbs) with cabinent; 25.4 kg (56 lbs) without cabinet
  • Size: 50.3 x 20.5 x 74.9 cm (19.8 x 8.1 x 29.5 in) with cabinet; 48.3 x 17.7 x 74.9 cm (19 x 7.0 x 29.5 in) without cabinet
  • Operating Temperature: 5° C / + 40° C
  • Operating Altitude: Up to 2000 M
  • Shock and Vibration: Normal Truck Transport
Description

The Model 150W1000B, when used with a sweep generator, will provide 150 watts of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The 150W1000B is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0dBm. The RF amplifier stages are protected from overtemperature by removing the DC voltage to them if an over-temperature condition occurs due to cooling blockage or fan failure. The 150W1000B is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. The DCP uses a color LCD touch screen display to indicate the operate status and fault conditions if an over-temperature or power supply fault has occurred. The unit can be returned to operate when the condition has been cleared.