Close
You have no items in your shopping cart.

Arbin LBT21024 Battery Test System

Manufacturer part number: LBT21024
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

Key Features and Functions 

The Arbin LBT21024 Battery Test System is a 0-10V, 8-channel, 100A/25A/5A/500mA battery life cycle tester with high-precision measurement and high-frequency data sampling capabilities. Arbin LBT21024 units record electrical parameters with a precision uncharacteristic of most battery testers, revealing electrochemical indicators and other important trends generally lost in the measurement noise a load with less precision generates. Resolution of DAC and ADC, as well as non-linearity of the unit's calibration and both short and long term drift all contribute to the enhancement of LBT21024 units' accuracy.

  • 0-10V
  • 8-channel
  • 100A/25A/5A/500mA
  • Four current ranges for each channel w/ 24-bit resolution
  • 2000 points per second data logging via embedded controllers
  • Integrates with select Electrochemical Impedance Spectroscopy (EIS) workstations
  • Interfaces with Arbin Life Cycle Chambers or other chambers
NameLBT21024-0~10V-100/25/5/0.5A-8CH-208V3P
Number of Channels8 channels
Voltage - Range0-10V
Voltage - Measurement Resolution 24 bit~2µV
Voltage - Measurement Precision200ppm
Voltage - Control Accuracy 0.02%FSR (mV)±4
Voltage - Input Impedance (GΩ)~10GΩ
Current - Range100A/25A/5A/500mA
Current - Measurement Resolution24 bit
Current - Control Accuracy 0.02%FSR1st range: ± 40mA
2nd range: ±10mA
3rd range: ±2mA
4th range: ±200µA
Current - Minimum V at Max Current0V
Current Rise Time (mS)~1
Minimum Step Time (mS)5
Data Logging Rate2000 points per second per system
Measurement Resolution100µ
Max. Continuous Power Output (W)1000
Chassis Size (W x D x H) (inch)20 x 34 x 72
Colling methodAir-cooled with variable speed fans; no infrastructure is required. Three feet clearance around chassis.
Working Temperature Range (°C)0 ~ 30
Connection to PCTCP/IP (Ethernet)
  • Battery Life Cycle Testing
  • Electrochemical Research and Development
  • Half-Cell Testing and Materials Research
  • Simulation of Real World Test Profiles
  • dQ/dt & Coulombic Efficiency Measurements
Description

Key Features and Functions 

The Arbin LBT21024 Battery Test System is a 0-10V, 8-channel, 100A/25A/5A/500mA battery life cycle tester with high-precision measurement and high-frequency data sampling capabilities. Arbin LBT21024 units record electrical parameters with a precision uncharacteristic of most battery testers, revealing electrochemical indicators and other important trends generally lost in the measurement noise a load with less precision generates. Resolution of DAC and ADC, as well as non-linearity of the unit's calibration and both short and long term drift all contribute to the enhancement of LBT21024 units' accuracy.

  • 0-10V
  • 8-channel
  • 100A/25A/5A/500mA
  • Four current ranges for each channel w/ 24-bit resolution
  • 2000 points per second data logging via embedded controllers
  • Integrates with select Electrochemical Impedance Spectroscopy (EIS) workstations
  • Interfaces with Arbin Life Cycle Chambers or other chambers