Close
You have no items in your shopping cart.
Search

California Instruments 3001iX AC Power Supply

Manufacturer part number: 3001iX
3kVA, 1 Phase
PURCHASE
Available QTY Price
New:   0
+ -
$0.00
Used:   0
+ -
$0.00 Configurations
X

Available Configurations

OPTIONS
Name Purchase
Electronic Output Switch IEC 61000-4-11 $0.00
Line sync option $0.00
Reconfiguration capability for Multi box systems $0.00
Impedance network for IEC-61000-3-3 flicker tests $0.00
Rackmount Slides $0.00
Watt-Hour measurements $0.00
RTCA/DO-160D test firmware (AC to DC test) $0.00
IEC 61000-4-11 test firmware $0.00
IEC 61000-4-13 test firmware $0.00
Mil Std 704E test firmware. Supports rev D and E $0.00
Manual Operation $0.00

Key Features and Functions 

The 3001iX is part of the iX Series II which represents a new generation of AC and DC power source that addresses increasing demands on test equipment to perform more functions at a lower cost. By combining a flexible AC/DC power source with a high performance power analyzer, the iX Series II systems are capable of handling complex applications that have traditionally required multiple instruments.

The sleek integrated approach of the iX Series II avoids the cable clutter that is commonly found in AC test systems. The i/iX Series II is rackmountable with a 4U chassis design. All connections are made internally and the need for external digital multimeters, power harmonics analyzer and current shunts or clamps is completely eliminated.

Using a state of the art digital signal processor in conjunction with precision high resolution A/D converters, the iX Series II provides more accuracy and resolution than can be found in some dedicated harmonic power analyzers. Since many components in the iX Series II are shared between the AC/DC source and the power analyzer, the total cost of the integrated system is less than the typical cost of a multiple unit system.

For less demanding applications, the i Series II provides similar output and transient capabilities as the iX Series II, as well as basic measurements.

  • Combination AC and DC Power Source and Power Analyzer
  • 3000 VA - 15000 VA of Output Power
  • Arbitrary Waveform Generation
  • Built-in Digital Power Analyzer
  • Scope Capture Capability
  • EN61000-3-2 and EN61000-3-3
  • Powerful Programing Software
  • Constant Power Mode
Programming Accuracy Voltage (rms): ± 0.2 of range, 16 to 1000 Hz, Frequency: ± 0.01 % of programmed value, Current Limit: ± 0.5 % of programmed value, Phase: < 1.5° with balanced load at 50/60 Hz
Programming Resolution Voltage (rms): 100 mV, Frequency: 0.01 Hz from 16 - 81.91 Hz, 0.1 Hz from 82.0 - 819.1 Hz, 1 Hz from 820-1000 Hz, Current Limit: 0.1 A, Phase, 0.1°
Output Relay Push-button controlled or bus controlled output relay
Output Impedance (iX Only) Programmable Z on 3001iX, 5001iX, 9003iX and 15003iX (3ø mode only) for 50 Hz fundamental
Resistive Range: 17 - 1000 mOhm,resolution: 4 mOhm accuracy, 2 % FS
Inductive Range: 230 - 1000 μH, resolution: 4 μH, accuracy: 2 % FS
Description

Key Features and Functions 

The 3001iX is part of the iX Series II which represents a new generation of AC and DC power source that addresses increasing demands on test equipment to perform more functions at a lower cost. By combining a flexible AC/DC power source with a high performance power analyzer, the iX Series II systems are capable of handling complex applications that have traditionally required multiple instruments.

The sleek integrated approach of the iX Series II avoids the cable clutter that is commonly found in AC test systems. The i/iX Series II is rackmountable with a 4U chassis design. All connections are made internally and the need for external digital multimeters, power harmonics analyzer and current shunts or clamps is completely eliminated.

Using a state of the art digital signal processor in conjunction with precision high resolution A/D converters, the iX Series II provides more accuracy and resolution than can be found in some dedicated harmonic power analyzers. Since many components in the iX Series II are shared between the AC/DC source and the power analyzer, the total cost of the integrated system is less than the typical cost of a multiple unit system.

For less demanding applications, the i Series II provides similar output and transient capabilities as the iX Series II, as well as basic measurements.

  • Combination AC and DC Power Source and Power Analyzer
  • 3000 VA - 15000 VA of Output Power
  • Arbitrary Waveform Generation
  • Built-in Digital Power Analyzer
  • Scope Capture Capability
  • EN61000-3-2 and EN61000-3-3
  • Powerful Programing Software
  • Constant Power Mode