Conducted Immunity System (CIS) to Test According to IEC 61000-4-6. The CIS series test systems are configured to perform conducted immunity testing according to IEC 61000-4-6. The system includes an ACS-series power amplifier, Coupling Decoupling Network (CDN), directional couplers, attenuators, cables, and CSAT software. These systems when properly configured are capable of testing your products to all levels given in IEC 61000-4-6 up to 230MHz.
The IEC-61000-4-6 standard requires that an appropriate coupling/decoupling network (CDN) with defined common-mode impedance be used for testing conducted immunity. Com-Power has a wide variety of CDNs. The system can be customized include the CDNs to fit your application at the time of purchase. Before you begin testing with the CDN you will need to establish a calibrated drive levels corresponding to the test levels. When used with a compatible signal generator and spectrum analyzer, the CSAT test software can fully automate this calibration and also perform the test. Com-Power CDNs are calibrated to meet the latest CISPR 16 test standards.
- RF Power Amplifier: ACS-250-100W
- Coupling Decoupling Networks: CDN-xx (model determined at the time of purchase)
- Directional Coupler: DCD-300-100W
- Shorting Adapter: ADA-xx (model determined at the time of purchase)
- Attenuator, 6dB: ATTN-6-100W
- Attenuator, 30dB: ATTN-30-100W
- Software: CSAT 2.xx
- Cable set: CIS-CB4
- For IEC 61000-4 testing
- RF power amplifiers
- Wide selection of CDNs
- Software automation
- Directional couplers