Close
You have no items in your shopping cart.

Com-Power EMC Testing Turntable TTW-400

Manufacturer part number: TTW-400
TTW-400 motorized wooden turntable. TTW-600 turntable available as well.
PURCHASE
AvailableQTYPrice
New:   1
+ -
$39,360.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

Key Features and Functions

Used for EMC Testing, the TTW-400 motorized wooden turntables are low profile, above ground circular testing platforms for rotating equipment under test (EUT) during commercial EMC testing. The turntable can support and rotate desktop or floor standing equipment. The equipment is rotated to identify the position or angle at which the EUT radiates the maximum electromagnetic interference. The turntable can be rotated clockwise or counter clockwise using the the remote switch. The rotation drive consist of motor and gear reduction drive. The table top is constructed using wood laminated with Formica to prevent absorption of moisture. Any optional ramp can be purchased with the turntable for loading heavy equipment on to the turntable.

SpecificationTTW-400TTW-600
Table Diameter4 feet (1.2 meters)6 feet (1.8 meters)
Table Height9 inches (23 cm)9 inches (23 cm)
Load Rating1000 lbs. (455 kg)1000 lbs. (455 kg)
Turntable RPM2.11.4
Power115 VAC, 60 Hz115 VAC, 60 Hz
Remote SwitchReversing DrumReversing Drum
Extension Cable9.8 feet ( 3 meters)9.8 feet ( 3 meters)
Table Weight149 lb (68 kg)172 lbs (78 kg)
Description

Key Features and Functions

Used for EMC Testing, the TTW-400 motorized wooden turntables are low profile, above ground circular testing platforms for rotating equipment under test (EUT) during commercial EMC testing. The turntable can support and rotate desktop or floor standing equipment. The equipment is rotated to identify the position or angle at which the EUT radiates the maximum electromagnetic interference. The turntable can be rotated clockwise or counter clockwise using the the remote switch. The rotation drive consist of motor and gear reduction drive. The table top is constructed using wood laminated with Formica to prevent absorption of moisture. Any optional ramp can be purchased with the turntable for loading heavy equipment on to the turntable.