Close
You have no items in your shopping cart.
Search

Com-Power LI-3P-163 3-Phase LISN

Manufacturer part number: LI-3P-163
150 kHz–30 MHz, 63 Amps
PURCHASE
AvailableQTYPrice
New:   1
+ -
$7,690.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

3 Phase LISN for CISPR / ANSI The LI-3P-1x series consists of four separate models of four-conductor, 50Ω / 50 μH Line Impedance Stabilization Networks (LISNs). The primary differences between the four models are their respective current ratings: LI-3P-116 16 Amps (per line, continuous) LI-3P-132 32 Amps (per line, continuous) LI-3P-163 63 Amps (per line, continuous) LI-3P-1100 100 Amps (per line, continuous) The side panels for each LISN are louvered for cooling purposes. The LI-3P-163 and LI-3P-1100 also include two internal cooling fans operated by a switch on the rear panel. Three-phase LISNs can be operated remotely or locally. Remote switching of the line under test (L1, L2, L3, N) is performed using the RLI-100 Remote LISN Interface, which controls the LISN via fiber-optic connection. In addition to the remote method, the line under test can also be selected using the mechanical, four-position switch located on the front panel of the LISNs. Using either switching method, the lines which are not selected are internally terminated into 50 ohms, while the selected line is terminated by the 50-ohm input impedance of the measuring instrument.

Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V

Frequency Range: 150 kHz–30 MHz

RF Connector: RF Measurement Port 50Ω - N-Type f

Inductors: 50 µH

Mains & EUT Connections: Remote interface power input port 5.5/2.5 mm power jack

Current Rating: 63 Amperes

Insertion Loss: Less than 0.7 dB

Application/Test Type: Power Line Conducted Emissions Tests

Isolation: More than 40dB

Dimensions: 19.3” x 13.9” x 2.3"

Weight: 27.5 lbs

Description

3 Phase LISN for CISPR / ANSI The LI-3P-1x series consists of four separate models of four-conductor, 50Ω / 50 μH Line Impedance Stabilization Networks (LISNs). The primary differences between the four models are their respective current ratings: LI-3P-116 16 Amps (per line, continuous) LI-3P-132 32 Amps (per line, continuous) LI-3P-163 63 Amps (per line, continuous) LI-3P-1100 100 Amps (per line, continuous) The side panels for each LISN are louvered for cooling purposes. The LI-3P-163 and LI-3P-1100 also include two internal cooling fans operated by a switch on the rear panel. Three-phase LISNs can be operated remotely or locally. Remote switching of the line under test (L1, L2, L3, N) is performed using the RLI-100 Remote LISN Interface, which controls the LISN via fiber-optic connection. In addition to the remote method, the line under test can also be selected using the mechanical, four-position switch located on the front panel of the LISNs. Using either switching method, the lines which are not selected are internally terminated into 50 ohms, while the selected line is terminated by the 50-ohm input impedance of the measuring instrument.

Product tags