Conducted susceptibility is a subcategory of MIL-STD-461 for evaluating the susceptibility of equipment under test (EUT) to specific currents and frequencies.
Avalon Test Equipment carries a variety of equipment to meet specific standards set under the conducted susceptibility category. Rent or purchase from Avalon and Test With Confidence®.
Key applications of the CWS 500N3 are in the automotive and aerospace area. Various international standards and MIL requirements call for magnetic field tests in the low frequency range. Apart from this the automotive industry requires conducted immunity tests with superposed sinusoidal signals on the DC supply voltage (ripple noise). For both applications the CWS 500N3 is the perfect equipment including everything in a single box, necessary for these tests. The CWS 500N3 meets requirements of SAE J1113-2, ISO 11452-8, DO 160D/E Section 18 and MIL-STD-461 D/E/F/G CS101, CS109 and RS101.
Haefely ONYX 16 ESD Simulator/Gun, 16kV has been specially designed to meet all latest international standards, including IEC61000-4-2 edition 2, and are the most ergonomic battery and AC power operated 16kV guns on the market.
The EM Test ESD NX30 is an ESD tester to simulate ESD pulses at higher voltages up to 30 kV in both air and contact discharge mode. It satisfies requirements exceeding the EN/IEC 61000-4-2 test levels and complies with automotive test applications.
There are 6 different lightning waveforms that can be produced with this system for the study and testing of lightning-induced transient susceptibility
Lightning Test Equipment. Thermo Scientific D569-L5 Lightning Test System Module for Waveform 6, Level 5. This module has multiple burst test capability to level 5.
Thermo Scientific D566-L5 LTS Surge Network Module; produces waveforms 1 and 4 to level 5 lightning testing. This module does pin injection, single stroke, multiple stroke, and test capability to level 5.
The D567-L5 LTS Surge Network Module produces waveform 5A to level 5 lightning testing. This module provides a pin injection, single stroke, multiple stroke test capability to level 5.