Close
You have no items in your shopping cart.
Search

Dynatel 573DL Cable & Fault Locator

Manufacturer part number: 573DL
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

The Dynatel 573DL cable fault locator is a portable instrument that measures and pinpoints sheath and conductor faults in buried or aerial cables and can also locate the path of buried cables. Four frequencies are available to accommodate varying factors such as distance, cable type, or soil conditions. A separate Tone function provides a powerful 577.5 Hz signal for identification. The instrument is also able to detect 6() Hz AC power signals. In depth measurement mode, the 573DL provides a direct digital readout of the estimated depth of buried cables, and a bar graph indication of the relative current in the cable.

  • Operation Modes
    • Single: Trace, fault, or tone
    • Multiple: Two trace frequencies or one trace frequency with fault locate signal
  • Signal Application Method
    • External: Direct connect cable, or Dyna-Coupler
    • Internal: Internal induction coil
  • Signal Level Control: Automatic, selectable between normal or high
  • Trace Frequency: One of four preprogrammed user-selectable frequencies
  • Tone Frequency: Preprogrammed to 577.5 Hz
  • Fault Locate Frequency: Preprogrammed to 15.625/31.25 Hz dual frequency
  • Volts Function: 0 to 250 V average AC & DC
  • ohms Function: 0 to 10 MΩ
  • Frequency (Active):Coupler/Probe Sensitivity: 6 - 25 kHz - 0.3 µV, 25 - 200 kHz - 0.5 µV
    • F1 - 577.5 Hz
    • F2 - 8 kHz
    • F3 - 33 kHz
    • F4 - 200 kHz
  • Depth Range: 0 to 100 inches (254 cm)
Description

The Dynatel 573DL cable fault locator is a portable instrument that measures and pinpoints sheath and conductor faults in buried or aerial cables and can also locate the path of buried cables. Four frequencies are available to accommodate varying factors such as distance, cable type, or soil conditions. A separate Tone function provides a powerful 577.5 Hz signal for identification. The instrument is also able to detect 6() Hz AC power signals. In depth measurement mode, the 573DL provides a direct digital readout of the estimated depth of buried cables, and a bar graph indication of the relative current in the cable.