Close
You have no items in your shopping cart.

EM Test Compact NX7 Multifunctional Test Generator

Manufacturer part number: COMPACT-NX7
The three-phase coupling/decoupling networks of the coupling NX series are used to couple EFT/Burst-, Surge- and Ring wave pulses on DC-lines or to three-phase (4-wire or 5-wire) mains supply systems for voltages up to 1,000 VDC / 3 x 690 VAC.
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

OPTIONS
NamePurchase
Accredited Calibration of BSPR-1-300-16$0.00
MFC 1000: 1m x 1m single coil: IEC61000-4-8, -4-9$11,610.00
Monitor Ports for Peak Impulse & EUT Power$0.00
iec. control SOFTWARE - control only (Key Feature)$0.00
iec.control Remote Control, Documentation Software$0.00
Front Panel Automation$0.00
Quick Start w/ Pre-Programmed Tests (Key Feature)$0.00
USB and Ethernet Interfaces (Key Feature)$0.00
MFT 30: Current transf. for mag field generation$870.00
Accredited Calibration of MFC1000$11,610.00
Accredited Calibration of MFT30 with MFC1000.x$0.00
ITP Set of immunity test probes$0.00
ITP/H Probe Set$2,800.00
ACC Capacitive Coupling Clamp$6,787.50
CCI Safety Cover for CCI$1,620.00
Accredited calibration of ACC at time of delivery$0.00
TVT 1-250-16.1 Auto transformer; 16A, 50/60Hz$2,900.00
Accredited calibration of TVT 1-250-16.1$420.00
PVF BKIT 1: Cal Kit for EFT Waveform Verification$2,740.00
Accredited calibration for PVF BKIT 1$810.00
CCI PVKIT 1: Cal Set for CCI per IEC61000-4-4$1,120.00
Accredited calibration for CCI PVKIT 1$380.00
PVS VP7: Differential voltage probe 7kV$2,730.00
Accredited Calibration for PVS VP 7$510.00
SVP 1700: Cal box 1700uF inrush current verif.$1,910.00
Accredited calibration for SVP 1700$420.00
SVP 100: 100Ohm low inductive resistor$3,160.00
Accredited calibration for SVP 100$420.00

The compact Next Generation NX7 is the most versatile tester to address transient and power fail requirements for both international and commercial standards. Featuring an easy-to-use color touch screen, the NX7 provides an economical solution for pre-compliance immunity testing as well as full-compliance testing and CE Marking. Its internal single-phase Coupling/Decoupling Network (CDN) can be extended for testing three-phase EUTs by means of an automatically controlled external CDN up to 200 A per phase. AMETEK CTS supplies a large range of accessories for various applications such as magnetic field tests and more.

Features:

  • Automatic coupler for Burst and Surge
  • Model with range selection 32, 63, 125, and 200 A
  • Meet requirements for 3x690 VAC and 1,000 VDC
  • LEDs indicate active mode and coupling
  • Automatic selection of Surge impedance
  • Fully remote-controlled by EM TEST compact NX
  • Option for railway application as per EN 50121

Interfaces

  • Sys.link: 26 pin high density connector to control an external devices
  • Connector EUT Supply: 3 x 480 V, CEE plug, 16 A to 125 A, 3 x 690 V, CEE plug, 16 A to 63 A, plugs for all other current ratings
  • Connector to EUT: up to 32 A: 4 mm safety plug, 63 A: 6 mm safety plug, 125 A: 6 mm safety plug, 200 A: 10 mm safety plug

Mains (Control)

  • Supply voltage: 85 V - 264 V
  • Frequency: 50/60 Hz
  • Power: approx. 75 W Standby: 100 mA
  • Fuses: 115 V: 2 x 4 A slow blow, 230 V: 2 x 2 A slow blow

Safety

  • Safety standard: IEC/EN 61010
  • Security circuit: Control input (24 VDC)
  • Warning lamp: Floating contact (max. 60 V/2 A)

Environment 

  • Temperature: 10 °C to 35 °C
  • Humidity: 30 % to 75 %, non condensing
  • Atmospheric Pressure: 86 kPa (860 mbar) to 106 kPa (1,060 mbar)
  • EN 50121
  • EN 61000-6-1
  • EN 61000-6-2
  • IEC 60601-1-2
  • IEC 61000-4-12
  • IEC 61000-4-4
  • IEC 61000-4-5
  • IEC 61009-1
  • IEC 61326
  • IEC 61850-3
  • ITU-T K.20
  • ITU-T K.21
  • ITU-T K.45
Description

The compact Next Generation NX7 is the most versatile tester to address transient and power fail requirements for both international and commercial standards. Featuring an easy-to-use color touch screen, the NX7 provides an economical solution for pre-compliance immunity testing as well as full-compliance testing and CE Marking. Its internal single-phase Coupling/Decoupling Network (CDN) can be extended for testing three-phase EUTs by means of an automatically controlled external CDN up to 200 A per phase. AMETEK CTS supplies a large range of accessories for various applications such as magnetic field tests and more.

Features:

  • Automatic coupler for Burst and Surge
  • Model with range selection 32, 63, 125, and 200 A
  • Meet requirements for 3x690 VAC and 1,000 VDC
  • LEDs indicate active mode and coupling
  • Automatic selection of Surge impedance
  • Fully remote-controlled by EM TEST compact NX
  • Option for railway application as per EN 50121