Close
You have no items in your shopping cart.

EM Test EFT 500N5 Electrical Fast Transient/EFTBurst Simulator

Manufacturer part number: EFT-500N5
The EFT 500N5 series are the state-of-the-art EFT/Burst testers with a built-in coupling/decoupling network for single phase or three-phase mains supply lines and a HV terminal to connect a capacitive coupling clamp.
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

EM Test EFT 500N5 Electrical Fast Transient/EFTBurst Simulator

The EFT 500N5 series are the state-of-the-art EFT/Burst testers with a built-in coupling/decoupling network for single phase or three-phase mains supply lines and a HV terminal to connect a capacitive coupling clamp.

The spike frequency can be varied from as low as 100Hz up to 1,000kHz. The EFT 500N5 is capable to generate 10,000 spikes per second or up to 1,000 spikes per burst.

Its performance fully complies with IEC 61000-4-4 Ed.3:2012. Pre-programmed Standard Test routines and a number of selected User Test routines make the EFT 500N5 an optimum standalone solution for both testing during development and final testing of products and sub-assemblies.

Test Level

  • Voltage Range: 200V - 4,800V
  • Into 50 ohm: 100V - 2,400V
  • Pulse Shape: Into 50 ohm load
  • Rise Time tr: 5 ns ± 30%
  • Pulse Width td: 50 ns ± 30%
  • Pulse Shape: Into 1,000 ohm load
  • Rise Time tr: 5 ns ± 30%
  • Pulse Width td: 35 ns to 150 ns
  • Source Impedance: 50 ohm ± 20%
  • Polarity: Positive/Negative

Output

  • Direct: Via HV coax connnector
  • Coupler: L, N and PE, all combinations
  • DUT Supply AC 50/60 Hz: single phase: 250V/ 32A, three-phases: 3x440V/ 32A or 50A
  • DUT Supply DC: 270V/ 32A or 50A
  • DUT Supply: Other DUT supply voltages on request
  • CRO Trigger: 15V trigger signal for oscilloscope; burst duration and pulse frequency can be checked

Interfaces

  • Serial Interface: USB
    Parallel Interface: IEEE 488, address 1 - 30
  • CN Interface: To control external CNI 503

General Data

  • Dimensions: 19"/6HU
  • Weight: 22 kg
  • Supply Voltage: 115/230V, +10/-15%
  • Fuses: 2x 2 AT (230V), 2x 4 AT (115V)
Description

EM Test EFT 500N5 Electrical Fast Transient/EFTBurst Simulator

The EFT 500N5 series are the state-of-the-art EFT/Burst testers with a built-in coupling/decoupling network for single phase or three-phase mains supply lines and a HV terminal to connect a capacitive coupling clamp.

The spike frequency can be varied from as low as 100Hz up to 1,000kHz. The EFT 500N5 is capable to generate 10,000 spikes per second or up to 1,000 spikes per burst.

Its performance fully complies with IEC 61000-4-4 Ed.3:2012. Pre-programmed Standard Test routines and a number of selected User Test routines make the EFT 500N5 an optimum standalone solution for both testing during development and final testing of products and sub-assemblies.