EM Test UCS 500N5 Multifunctional Test Generator

Manufacturer part number: UCS-500N5

For Transients (EFT/Burst, Surge, and Power Fail) Up to 5.5KV

PURCHASE

Available	QTY	Price
New: 0	Qty: + -	$0.00
Used: 0	Qty: + -	$0.00	Configurations

Available Configurations

Overview
Specifications

The UCS 500N5 includes everything necessary to conduct fully compliant tests. The power mains supply for the controls and for the DUT is separate to render it more flexible to use with different DUT supply voltages.

The UCS 500N5 can be operated manually from the front panel or by remote via the built-in USB or GPIB interface. Fail inputs allow controlling an ongoing test sequence based on the status of the DUT. Monitoring outputs (BNC) are offered for easy signal measurement and verification. Safety features such as interlock and warning lamp control are available.

Pre-programmed Standard Test routines allow the highest user convenience. Still, the UCS 500N5 offers the QuickStart test routine where parameters can be changed on-line during the test to evaluate the susceptibility level of an individual DUT.

The EM Test UCS 500N5 ultra-compact simulator is the most versatile tester to cover transient and power fail requirements according to international standards (basic and generic standards) and product/product family standards. The UCS 500N5 is the most economic solution for tests during development as well as for full-compliant immunity tests and CE Marking for single-phase DUT with the ability to be extended for testing three-phase DUTs by means of an automatically controlled external coupling network up to 200A.

Built-in Single phase 300 Volt/16 Amp coupler
Manual operation from the front panel
USB and GPIB-Bus for remote control
Monitor outputs for peak voltage and peak current
Fail inputs
External variac control 0-10Vdc

Specifications

Standards Met	FCC 97-270 (part 68); IEC 60255-22-5; IEC 61000-4-11; IEC 61000-4-29; IEC 61000-4-4; IEC 61000-4-5; IEC 61000-4-8; IEC 61000-4-9; IEC 61326; IEC 61850-3
Application/Test Type	CE Marking - Cover transient and power fail requirements according to international standards for immunity tests
Pulse voltage (open circuit)	160V - 5,000V ± 10%
Impedance	2 Ohm
Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse) Pulse conforms to IEC/EN 61000-4-5
Parameter	Value
Pulse current (short circuit)	Max. 2,500A ± 10%
Coupling	Line to line; Line(s) to ground
Repetition time	10ms - 9,999ms
Pulse repetition	max. 1Hz (1s - 999s)
Phase synchronization	0° - 360°, resolution 1° (16 - 500Hz)
Polarity	positive / negative / alternating
Phase synchronization	0° - 360°, resolution 1°
Coupling	L, N, PE; all combinations
Dips, Interrupts & Variations Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29
Parameter	Value
Dips, Interrupts & Variations	As per IEC/EN 61000-4-11, IEC/EN 61000-4-29 and IEC/EN 61000-6-1, -6-2
Test duration	1 - 30,000 or endless, selectable
Uvar with step transformer	300V AC + DC
Test duration	0:01min - 99:59min
Peak inrush current capability	500 Amps
Burst (EFT) 5/50 ns Pulse conforms to IEC/EN 61000-4-4
Parameter	Value
Pulse amplitude	200V - 5,500V ± 10%; 100V - 2,750V ± 10% into 50ohm
Burst frequency	0.1 kHz - 1,000 kHz
Polarity	positive / negative
Uvar with optional variac	N/A
Switching times	Under 5us into a 100ohm resistive load
Event time	20us - 9,999s
Repetition time	10ms - 9,999s
Phase synchronization	0° - 360°, resolution 1° (16 - 500Hz)
Burst time	0.10ms - 999ms
Dimensions	19", 3HU
Weight	25 kg's (55 Lbs)

Description

Built-in Single phase 300 Volt/16 Amp coupler
Manual operation from the front panel
USB and GPIB-Bus for remote control
Monitor outputs for peak voltage and peak current
Fail inputs
External variac control 0-10Vdc

Product tags