Close
You have no items in your shopping cart.

Electromagnetic compatibility (EMC) is the branch of electrical engineering that focuses on protecting electronic devices from the interference of electromagnetic energy. The unintentional generation or reception of electromagnetic energy may cause electromagnetic interference (EMI) and damage the equipment. Along with the steep and continuous increase in electronic device usage comes a corresponding increase in the possibility of interference, making EMC testing more crucial than ever.

The four types of EMC testing include: conducted immunity, conducted emissions, radiated immunity, and radiated emissions. Specific standards have been developed to ensure safety and repeatable results when testing equipment that must be followed. IEC (International Electrotechnical Commission), ISO (International Organization for Standardization), and CISPR                   (International Special Committee on Radio Interference) work individually and together to create these standards in order to provide solutions to current global change. Our EMC and EMI testing equipment has been designed to fulfill these specific test standards such as MIL-STD-461EN/IEC-61000-4, and CISPR.

Developers of automotive, medical, defense, aerospace, and consumer electronics technology all rely on EMC testing to ensure devices meet strict industry requirements.

  

Avalon Test Equipment carries a wide variety of EMC test equipment ranging from ESD guns and RF amplifiers to immunity testers. Browse our inventory by category to fulfill specific testing requirements and Test With Confidence®.

Read More

Read Less

3 Items in Grid 4 Items in Grid List

IFI SMCC500 Solid State Amplifier

200 MHz to 1000 MHz, 500 W

Teseq MFO-6502 Magnetic Field Generator

Automatic Power Line Frequency Magnetic Field

Teseq INA-4415 Flexible Tip Set

Designed for Teseq NSG 437 and 3438

Teseq INA-4416 Soft Touch Contact Tip

Designed for Teseq NSG 438A Automotive

Pearson 8705C Current Probe

The Pearson 8705C Current Probe for MIL-STD-461 CS114, CS115, CS116 supports a frequency Range 10 kHz to 400 MHz

Pearson F-3 Calibration Fixture

For MIL-STD-461 CS114, CS115, CS116

Teseq CBA 400M-260 Broadband Amplifier

Designed specifically for automotive, military and aerospace BCI and other susceptibility EMC testing,this mismatch tolerant Class A amplifier delivers power continuously into the varying match typically associated with this type of testing.

A.H. Systems SAS-574 Double Ridge Guide Horn Antenna

The A.H. Systems Double Ridged Guide Horn is a broadband antenna that offers excellent performance over the frequency range of 18GHz to 40GHz. High gain, low VSWR, input handling capability up to 10 watts CW and rugged design make this horn antenna excellent for both immunity and emissions testing.

M Precision MiniZap-15 ESD Simulator

The MPL MZ15 ESD Simulator Gun for IEC 1000-4-2 compliance testing. Includes 150pF/330 ohm discharge network, TPA-1, TPA-2, TPC-2A discharge tips, battery charger, carrying case.

IFI T186-50 CW TWT Microwave Power Amplifier

The T186-50 from the T-50 series of RF Microwave TWT Amplifiers have proven to be the most reliable with proven performance as the best in the industry.

IFI T62-300 TWT Microwave Power Amplifier

The IFI T62-300 RF Microwave TWT (traveling Wave Tube) Amplifier provides outstanding RF performance. The IFI T62-300 Amplifier incorporate the latest features with respect to control and monitoring. The amplifier is a field proven and reliable amplifier, that offers unsurpassed performance as the best in the industry. 2 - 6 GHz, 300W

IFI T825-500 TWT Microwave Power Amplifier

The IFI T825-500 is part of the T-500 Series of High Power TWT Microwave Power Amplifiers with a frequency range from 1GHz-18GHz and 500 watts.

IFI T186-300 TWT Microwave Power Amplifier

The IFI T186-300 is part of the T-300 Series of High Power TWT Amplifiers provide outstanding RF performance.

IFI T188-250 TWT Microwave Power Amplifier

Rent IFI's T188-250 High Power TWT Microwave Power Amplifier. CW TWT 7.5–18.0GHz, 250 watts

3ctest EDS 16H Electrostatic Discharge Simulator

Up to 16 kV, IEC/EN 61000-4-2 Compliance

EM Test ACS 503N30 AC Voltage Source

The EM Test ACS 503N30 is a three-phase AC sources, specifically designed for harmonics and flicker testing.

EM Test PFM 200N100.1 Automotive Power Fail Simulator

The EM Test PFM 200N100.1 has been designed to fully meet the requirements for E10, E13 and E14 of the LV 124 and the E48-09 of the LV 148. It also allows to perform microinterruptions with fast rise/fall time of as low as 200ns as required by GMW 3172, sec. 9.2.18

EM Test PFS 503N32 Power Fail Simulator

Electronic and electrical equipment may be affected by voltage dips, short interruptions and voltage variations of the power supply. Dips and interruptions are caused by faults in the public supply network, in installations or by sudden large change of load. Testing to such phenomena is required to proof that electronic and electrical equipment do not fall into unsafe operation conditions. EM TEST offers a full range of simulators up to 3x690VAC, 100A and DC voltage capability of up to 600V.

Teseq CDN 3425 Burst/EFT Coupling Clamp

The CDN 3425 is Teseq’s newly designed Burst EFT coupling clamp.

Filter by:

Clear All
Close