You have no items in your shopping cart.

EMC receivers and EMI analyzers are utilized for radiated and conducted emissions testing. These are essential pieces of equipment for when transient signals or spurious emissions are present, as they are used to collect and analyze data. CISPRIECFCC, and MIL-STD have all established standards for testing emissions and suggest the use of an EMI receiver to be fully compliant. This is because EMI receivers are more reliable in making measurements. While testing, it is important to examine test standard requirements for Quasi-peak (QP) detectors or CISPR average detectors, requirements for resolution bandwidth (RBW) in regards to a satisfactory amount of measurement points per frequency span, noise floor extension, and software for pass-fail conditions that are not handled well by most spectrum analyzers. EMC receivers and EMI analyzers work best for pre-compliance testing, evaluating, and troubleshooting.

Avalon Test Equipment carries a variety of EMC receivers and EMI analyzers from top manufacturers (R&SKeysight, and more to meet your testing requirements.

Rent from Avalon and Test With Confidence®.

3 Items in Grid 4 Items in Grid List

Teseq ProfLine 2105

ProfLine 2105 is an accurate and flexible single-phase system designed to measure harmonics & flicker in accordance with IEC 61000-3-2 and IEC 61000-3-3.

EM Test DPA 503N 3-Phase Power Analyzer With Harmonics & Flicker

The DPA 503N is used for 3-phase applications but also supports single phase applications.

Narda-STS EA 5091 E-Field Probe, Shaped FCC

Narda-STS EA 5091 Probe: E-Field, shaped FCC, 300kHz to 50GHz, 0.5 to 600% of FCC Occupational/Controlled limits for NBM-series meters.

EM Test ACS 503N30 AC Voltage Source

The EM Test ACS 503N30 is a three-phase AC sources, specifically designed for harmonics and flicker testing.

EM Test AIF 503N32.1 3-Phase Flicker Impedance Network

EM Test AIF 503N32.1 is a three-phase flicker impedance with a nominal current from 16A up to 75A per phase offering two different impedance values

Narda-STS EB 5091 E-Field Probe, Shaped IEEE

Narda-STS EB 5091 Probe: E-Field, shaped IEEE, 3MHz to 50GHz, 0.5 to 600% of IEEE, C95.1-2005 for People in Controlled Environments. For use with NBM-series meters.

Narda-STS EF5091 E-Field Probe, Flat

Narda EF5091 Probe: E-Field, flat, 300MHz to 50GHz, 8 to 614V/m

Narda-STS EC 5091 E-Field Probe, Shaped SC6 Canada

Narda-STS EC 5091 Probe: E-Field, shaped SC6 Canada, 300kHz to 50GHz, 0.5 to 600% of Safety Code 6 for People in Controlled Environments. For use with NBM-series meters.

Narda-STS NBM-520 Broadband Field Meter

Narda-STS NBM-520 is the most accurate non-ionizing radiation survey system available. It provides broad frequency coverage of electric and magnetic fields.

Rohde & Schwarz ESCI EMI Test Receiver

For compliance tests meeting all civil standards from 9 kHz to 3/7 GHz

Rohde & Schwarz ESIB26 EMI Test Receiver

Each R&S® ESIB combines the high sensitivity, large dynamic range and selectivity of a high-end EMI test receiver with the flexibility and speed of a top-class spectrum analyzer. The R&S® ESIB EMI test receivers fully comply with the basic standard CISPR 16-1-1 and carry out measurements in conformance with all civil and military EMI standards such as CISPR, EN, VDE, ANSI, FCC, BS, ETS, VCCI, MIL-STD, VG, DEF-STAN, etc.

Rohde & Schwarz ESR7 EMI Test Receiver

The R&S ESR7 EMI Test Receiver is a dual instrument that measures electromagnetic disturbances while simultaneously functioning as a fully featured, powerful signal and spectrum analyzer for lab applications

Rohde & Schwarz FSP38 Spectrum Analyzer

The Rohde & Schwarz, Inc. FSP-38 spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Rohde & Schwarz, Inc. FSP-38. The CRT displays received signal strength (y-axis) against frequency ( x-axis).

Keysight E7402A EMC Spectrum Analyzer

Early evaluation of your design's EMI performance is essential for a successful product. The Keysight E7402A EMC Spectrum Analyzer is part of the E7400A Series which provides the capabilities you need in an analyzer to make in-house EMI pre-compliance testing a reality.

Rohde & Schwarz ESIB40 EMI Test Receiver

The Rohde & Schwarz ESIB family of EMI test receivers combines the high sensitivity, large dynamic range, and selectivity of a high-end test receiver with the flexibility and speed of a top-class spectrum analyzer in one instrument.

Narda-STS ED 5091 E-Field Probe, Shaped ICNIR

Narda-STS ED5091 Probe: E-Field, shaped ICNIRP, 300kHz to 50GHz, 0.5 to 600% of ICNIRP Recommendations for Occupational Exposures. For use with NBM-series meters.

Narda-STS EF 0691 E-Field Probe, Flat

100 kHz–6 GHz, 0.35 to 650V/m

Narda-STS EF0392 E-Field Probe, Flat

Narda EF0391 Probe: E-Field, flat, 100kHz to 3GHz, 0.2 to 320V/m

Narda-STS EF6091 E-Field Probe, Flat

Narda-STS EF6091 Probe: E-Field, flat, 100MHz to 60GHz, 0.7 to 300V/m

Keysight 34460A Digital Truevolt Multimeter

100 mV to 1,000 V DCV, 100 mV to 750 V ACV