Contact us 800.813.8448

Recently added item(s) ×

You have no items in your shopping cart.

Amplifier Research 40AD1 RF Power Amplifier; 40 watt CW, DC to 1MHz

Model Number: 40AD1

Amplifier Research 40AD1

Click on above image to view full picture

  • Amplifier Research 40AD1
Condition

New

Availability
  • Quote to Rent/Lease
  • Quote to Purchase
Description

Amplifier Research 40AD1 RF Power Amplifier; 40 watt CW, DC to 1MHz

The AR 40AD1 amp is a self-contained, broadband unit designed for laboratory applications where instantaneous bandwidth, high gain and moderate power output are required. Utilization of push-pull MOSFET circuitry lowers distortion, improves stability and allows operation into any load impedance without damage. The Model 40AD1, when used with an RF sweep generator will provide a minimum of 40 watts of swept power. The Model 40AD1 is direct coupled throughout, allowing very low frequency signals to be used.

Included is a front panel gain control which permits the operator to conveniently set the desired output level. Housed in a stylish, contemporary enclosure, the Model 40AD1 provides available RF power for typical applications such as RF susceptibility testing, antenna and component testing, watt meter calibration, and use as a driver for high power amplifiers.

The Model 40AD1 amplifier uses universal input line voltage switching power supplies, thus allowing its use over a wide range of input voltages without wiring or switch position changes.

Documentation
Test Standards
  •  
Specifications
  • 40 watt CW, DC to 1 MHz
  • FLATNESS: ±1.5dB max
  • FREQUENCY RESPONSE: DC tp 1MHz instantaneously
  • INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum
  • GAIN (at maximum setting): 45dB minimum
  • GAIN ADJUSTMENT (continuous range): 18dB minimum
  • INPUT IMPEDANCE: 50Ω, VSWR 1.5:1 max
  • OUTPUT IMPEDANCE: 50Ω, VSWR 2.0:1 max
  • MISMATCH TOLERANCE: 100% of rated power without foldback; will operate without damage or oscillation with any magnitude and phase of source and load impedance
  • MODULATION CAPABILITY: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
  • HARMONIC DISTORTION: Maximum at 25 watts output, -25dBc
  • THIRD ORDER INTERCEPT POINT: 54dBm, typical
  • PRIMARY POWER: 90 to 135/180 to 270VAC, 50/60Hz single phase autoranging; 400 watts maximum
Standard Accessories Included
  • Calibration certificate
  • Manual
  • Power cord
  • All standard accessories
$0.00

Request a Quote