Contact us 800.813.8448

Recently added item(s) ×

You have no items in your shopping cart.

Amplifier Research 50WD1000 RF Power Amplifier; 50 watt CW, DC to 1000MHz

Model Number: 50WD1000

View Price / Get Quote

Amplifier Research 50WD1000

Click on above image to view full picture

  • Amplifier Research 50WD1000


  • Quote to Rent/Lease
  • Quote to Purchase

Amplifier Research 50WD1000 50W CW, DC to 1GHz Dual-Band Amplifier

Model 50WD1000 is a portable, self-contained, air-cooled, broadband, solid state amplifier designed for applications where extensive bandwidth and high gain are required. Push-pull circuitry is utilized in all of the high power stages in the interest of lowering distortion and improving stability. The Model 50WD1000 covers the frequency range from DC to 1000MHz in two bands. The low band covers from DC to 0.5MHz. The high band covers from 0.5MHz to 1000MHz. These bands can be selected automatically, manually or by remote control through the remote connector. The 50WD1000, when used with an RF sweep generator, will provide a minimum of 50 watts of swept power. Provisions are included for the remote control of the basic operating functions of the amplifier. Computer control can be accomplished using the AR CP2001 or CP3000 accessories.

The export classification for this equipment is EAR99. These commodities, technology or software are controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited.

Test Standards
  • RATED OUTPUT POWER: 50 watts minimum
  • INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum
  • Nominal: 60 watts
  • Minimum: 40 watts
  • POWER OUTPUT @ 1dB COMPRESSION, Nominal: 50 watts
  • POWER OUTPUT @ 1dB COMPRESSION, Minimum: 30 watts
  • FLATNESS, typical: ±1.0dB
  • FLATNESS, max: ±1.5dB
  • FREQUENCY RESPONSE: DC to 1GHz (in two bands selected automatically or manually)
  • GAIN: 47dB minimum
  • INPUT IMPEDANCE: 50Ω VSWR 2.0:1 maximum
  • OUTPUT IMPEDANCE: 50Ω nominal
  • MISMATCH TOLERANCE: 100% of rated output power; will operate without damage or oscillation with any magnitude and phase of source and load impedance
  • MODULATION CAPABILITY: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
  • HARMONIC DISTORTION: -20dBc maximum at 35W
  • PRIMARY POWER (selected automatically): 90 to 132, 180 to 264VAC; 50/60Hz; single phase; 700 watts maximum
  • REMOTE CONTROL: 25 Pin Subminiature D on rear panel
  • COOLING: Forced air (self contained fans)
Standard Accessories Included
  • Calibration certificate
  • Manual
  • Power cord
  • All standard accessories
For pricing, please request a quote.

Request a Quote