Fischer Custom Communications
Fischer Custom Communications, Inc. designs, develops and manufactures specialized transient protection devices, RF test and measurement instruments and EMP test systems.
Fischer F-130A-1 Bulk Current Injection Probe
1MHz - 400MHz Frequency Used for BCI testing in accordance With automotive specifications like SAE J15447 CW input power rating is 100 watts for 30 minutes
Fischer F-120-1 Bulk Current Injection Probe
The Fischer Custom Communications FCC F-120-1 Bulk Current Injection Probe has been designed to extend the use of conducted immunity testing over the bandwidth of 10 kHz – 175 MHz
Fischer BCICF-1 Bulk Current Injection Probe Fixtures
Part of the test equipment required by most of the Bulk Current Injection test procedure specifications. Allows the user the quickly and easily calibrate the injection probe prior to performing compliance testing.
Fischer BCICF-6-150 Bulk Current Injection Probe Fixtures
Designed for the IEC 61000-4-6 Ed 4.0, section 6.2.3.1 – 6.2.3.2 that states “…the increase of the transmission loss of the test jig, produced by the insertion of the Current Clamp, shall not exceed 1.6 dB”. This 1.6 dB requirement is verified by subtracting the insertion loss of the calibration fixture without the Clamp in place from the fixture insertion loss with the Clamp in place.
Fischer F-140 Bulk Current Injection Probe
10 kHz – 1 GHz Frequency Used for BCI testing in accordance With automotive specifications like SAE J15447 Useable frequency range is 100 kHz – 1300 MHz With an insertion loss of less than 7 dB from 700 kHz to 500 MHz Input power rating is 100 watts for 30 minutes
Fischer FCC-BCICF-1 Bulk Current Injection Probe Fixtures
10 kHz – 400 MHz Frequency Injection Probe Calibration Fixtures Part of the test equipment required by most of the Bulk Current Injection test procedure specifications Calibration fixture allows the user the quickly Easily calibrate the injection probe prior to performing compliance testing
Fischer FCC-BCICF-2 Bulk Current Injection Probe Fixtures
10 kHz – 1 GHz Frequency Injection Probe Model Numbers: F-140, F-140A Injection Probe Calibration Fixtures Part of the test equipment required by most of the Bulk Current Injection test procedure specifications Test fixture allows the user to quickly and easily calibrate the injection probe
Fischer FCC-BCICF-6-150 Bulk Current Injection Probe Fixtures
150 kHz – 230 MHz Frequency Injection Probe calibration fixtures Part of the test equipment required by most of the Bulk Current Injection Test Procedure Specifications Allows the user to quickly and easily calibrate the injection probe prior to performing the compliance testing
Fischer F-203I-A-23MM EM Clamp
The Fischer Custom Communications F-203I-A-23MM EM Clamp is a clamp-on injection device for immunity testing, supporting a frequency range of 10kHz - 1GHz, 100 Watts CW
- 1
- 2