Close
You have no items in your shopping cart.

Products tagged with 'fischer custom communications'

3 Items in Grid 4 Items in Grid List

Fischer BCICF-1 Bulk Current Injection Probe Fixtures

Part of the test equipment required by most of the Bulk Current Injection test procedure specifications. Allows the user the quickly and easily calibrate the injection probe prior to performing compliance testing.

Fischer BCICF-6-150 Bulk Current Injection Probe Fixtures

Designed for the IEC 61000-4-6 Ed 4.0, section 6.2.3.1 – 6.2.3.2 that states “…the increase of the transmission loss of the test jig, produced by the insertion of the Current Clamp, shall not exceed 1.6 dB”. This 1.6 dB requirement is verified by subtracting the insertion loss of the calibration fixture without the Clamp in place from the fixture insertion loss with the Clamp in place.

Fischer F-120-1 Bulk Current Injection Probe

The Fischer Custom Communications FCC F-120-1 Bulk Current Injection Probe has been designed to extend the use of conducted immunity testing over the bandwidth of 10 kHz – 175 MHz

Fischer F-130A-1 Bulk Current Injection Probe

1MHz - 400MHz Frequency Used for BCI testing in accordance With automotive specifications like SAE J15447 CW input power rating is 100 watts for 30 minutes