Close
You have no items in your shopping cart.

Haefely PSURGE 30.2 Test System

Manufacturer part number: PSURGE 30.2
30kV/30kA
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

OPTIONS
NamePurchase
PS30-CW: Impulse Module (1.2/50 µs...8/20 µs)$0.00
PS30-8x20: Current Wave Shape Impulse Mod. 8/20 µs$0.00
FP-SURGE 3010: Manual 1Φ CDN for Surge Comb. Wave$96,747.00

This surge test system is used to perform high energy surge tests. Energy surges are generated by atmospheric lightning in power circuits. A surge is characterized by high energy and relative fast front times. Pulse durations are widely variable as are the coupling paths.

The PSURGE 30.2 surge test system is designed to generate a broad variety of surge impulses. Impulse modules can be exchanged quickly allowing PSURGE 30.2 to be used for different applications. Impulse module type is detected by the system software.

The built-in microprocessor control unit serves as user interface and control all the internal functions. When adding the remote control option, it is possible to use the PSURGE 30.2 with the WinPATS control and reporting software.

The integration in the WinPATS control and reporting software package enhances an efficient set-up and operation of this test system. Most importantly, the test load can be transferred to a computer freeing valuable resources. An integrated test cabinet provides optimal and safe connections for component testing.

Key Features and Functions:

  • Up to 30kV impulse voltage
  • Up to 30kA impulse current
  • Automatic polarity switching
  • Peak voltage and current monitoring
  • Integrated large test cabinet
  • Remote control option
  • User manual
  • Mains cable (country specific)
  • Warning lamp
  • Emergency stop switch
  • Charging voltage: range 3...33kV
  • Test cabinet: 39 x 29 x 32 cm (W x D x H)
  • Capacitors: 9uF / 36uF
  • HV switch: triggered spark gap
  • Stored energy: 5kJ at max. charging voltage
  • Impulse polarity: positive, negative, alternating
  • HV output: terminals inside the test cabinet
  • Impulse circuit: floating, max. voltage between common and ground 500V AC
  • Power mains: 208, 230 or 240V 50/60Hz, 1800VA
  • External synchronization: 0°....360° in 1° steps
  • Weights and dimensions (W x D x H, net weight): PSURGE 30.2 60 x 100 x 190 cm, approx. 320 kg
Description

This surge test system is used to perform high energy surge tests. Energy surges are generated by atmospheric lightning in power circuits. A surge is characterized by high energy and relative fast front times. Pulse durations are widely variable as are the coupling paths.

The PSURGE 30.2 surge test system is designed to generate a broad variety of surge impulses. Impulse modules can be exchanged quickly allowing PSURGE 30.2 to be used for different applications. Impulse module type is detected by the system software.

The built-in microprocessor control unit serves as user interface and control all the internal functions. When adding the remote control option, it is possible to use the PSURGE 30.2 with the WinPATS control and reporting software.

The integration in the WinPATS control and reporting software package enhances an efficient set-up and operation of this test system. Most importantly, the test load can be transferred to a computer freeing valuable resources. An integrated test cabinet provides optimal and safe connections for component testing.

Key Features and Functions:

  • Up to 30kV impulse voltage
  • Up to 30kA impulse current
  • Automatic polarity switching
  • Peak voltage and current monitoring
  • Integrated large test cabinet
  • Remote control option