Close
You have no items in your shopping cart.

Haefely PSURGE 4010 Combination Wave Surge Generator

Manufacturer part number: PSURGE4010
$0.00
excluding shipping
The Haefely PSURGE 4010 Combination Wave Surge Generator is a one-box solution for: IEC / EN 61000-4-5 Edition 1 and 2 EN 61000-6-1 EN 61000-6-2
+ -
X

Available Configurations

HIGH VOLTAGE INPUT TESTER
30020912
$0

Surge voltage transients are caused by switching and lightning effects. The PSURGE 4010 allows evaluation of the performance of equipment when subject to high-energy disturbances on power and interconnection lines. This is the solution for IEC / EN 61000-4-5, EN-61000-6-1, and EN 61000-6-2.

Benefits of the Haefely PSURGE 4010 include:

  • Totally reproducible test results
  • Consistent pulse parameters
  • Fully automatic execution of complex test routines and sequences
  • Cost-effective solution
  • Expandable to 3 phase testing with FP-SURGE 32.1
  • Expandable to impulse magnetic field testing (IEC 61000-4-9) with MSURGE

Features

  • Combination wave Voltage: 1,2/50us Current: 8/20us
  • Impulse voltage: 200V ... 4.2kV
  • Impulse current: 100A ... 2,1kA
  • Maximum impulse repetition rate 12 per minute
  • Positive, negative and user definable alternating polarity
  • Integrated CDN for 16A at 264Vac and 110Vdc
  • Impulse voltage, current and EUT current measurement
  • Test parameter ramp functions
  • Phase angle synchronization
  • 18 test and 18 program memory locations
  • Remote control using WinFEAT&R©
  • Waveshape: 1,2/50 us and 8/20us according to IEC 61000-4-5
  • Impulse Voltage: 200V; 4,2kV
  • Impulse Current: 100A; 2,1kA
  • Impulse Repetition: Up to 12 per minute
  • Impulse Polarity: Positive, Negative, Alternating
  • Power Supply: 85V; 264V; 50/60 Hz
  • Max. AC Power: 264V / 16A, 50-60 Hz on Shuko plug
  • Max. DC Power: 110V / 16A
  • Coupling Mode: 18uF and 9uF+10W acc. to IEC 61000-4-5
  • Size: 19" / 3 units
  • Weight: 18 kg
Description

Surge voltage transients are caused by switching and lightning effects. The PSURGE 4010 allows evaluation of the performance of equipment when subject to high-energy disturbances on power and interconnection lines. This is the solution for IEC / EN 61000-4-5, EN-61000-6-1, and EN 61000-6-2.

Benefits of the Haefely PSURGE 4010 include:

  • Totally reproducible test results
  • Consistent pulse parameters
  • Fully automatic execution of complex test routines and sequences
  • Cost-effective solution
  • Expandable to 3 phase testing with FP-SURGE 32.1
  • Expandable to impulse magnetic field testing (IEC 61000-4-9) with MSURGE

Features

  • Combination wave Voltage: 1,2/50us Current: 8/20us
  • Impulse voltage: 200V ... 4.2kV
  • Impulse current: 100A ... 2,1kA
  • Maximum impulse repetition rate 12 per minute
  • Positive, negative and user definable alternating polarity
  • Integrated CDN for 16A at 264Vac and 110Vdc
  • Impulse voltage, current and EUT current measurement
  • Test parameter ramp functions
  • Phase angle synchronization
  • 18 test and 18 program memory locations
  • Remote control using WinFEAT&R©