Close
You have no items in your shopping cart.

i430 Flex Current Clamp 4 Pack

Manufacturer part number: I430-FLEX
$0.00
excluding shipping
This flexible probe features flexible and lightweight measuring head for quick and easy installation in hard to reach areas, without batteries or an external power source.
+ -
X

Available Configurations

3000A FLEXIBLE AC CURRENT CLAMP 4 PACK
30004507
$900

The i430 Flex is an AC current probe utilizing the Rogowski principle. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas, without batteries or an external power source.

Available as a pack of 4 pieces of the i430 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 430 series.

  • Probe and Cable Material: TPE rubber, reinforced insulation; UL94 V-0, RED Munsell 7.5; R 1/14
  • Couplings Material: Polypropylene, UL94 V-0
  • Proble Cable Length: 610 mm
  • Probe Cable Diameter: 12.4 mm
  • Probe Cable Bend Radius: 40 mm
  • Output Cable Length: 2.5 meters RC58
  • Output Connector: Safety BNC connector
  • Operating Range: -20° C to 90° C
  • Storage Temperature: -40° C to 105° C
  • Operating Humidity: 15% to 85% (non condensing)
  • Degree of Protection (Probe): IP41
  • Current Range: 3000 A AC rms
  • Voltage Output (@ 1000 A rms, 50 Hz): 85 mV
  • Accuracy: ±1% or reading (@ 25° C, 50 Hz)
  • Linearity (10% to 100% of range): ±0.2% of reading
  • Noise (10 Hz - 7 kHz): 1.0 mV AC rms
  • Output Impedance: 82 Ω min
  • Load Impedance: 50 kΩ
  • Internal Resistance per 100 mm Probe Length: 10.5Ω ±5%
  • Bandwidth (-3 db): 10 Hz to 7 kHz
  • Phase Error (45 - 65 Hz): ±1°
  • Position Sensitivity: ±2% of reading max
  • Temperature Coefficient: ±0.08% max of reading per ° C
  • Working Voltage: 1000 V AC rms or DC (head); 30 V max (output)
Description

The i430 Flex is an AC current probe utilizing the Rogowski principle. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas, without batteries or an external power source.

Available as a pack of 4 pieces of the i430 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 430 series.

Product tags