Close
You have no items in your shopping cart.
Search

The International Electrotechnical Commission (IEC) is the world's leading organization for preparing and publishing international standards for "electrotechnology" (electrical, electronic, and related technologies). These standards are important to ensure the precise safety and performance of electrical equipment. The millions of electronics being used around the world rely on international IEC standards in order to have a reliable system for making sure they will work properly and safely in different situations. The members of IEC are national committees that appoint experts in the industry, government bodies, associations, and academia to come together and produce appropriate standards.

IEC has created a platform for industries, governments, and companies that allows them to meet and discuss the development of international standards.

Avalon Test Equipment offers a variety of test equipment to meet specific IEC standards. Search by standard and Test With Confidence®.

3 Items in Grid 4 Items in Grid List

Teseq NSG 4070C-80 Compact Immunity Test System

With integrated power amplifier 80 W module 150 kHz–230 MHz

Teseq CBA 1G-070B Broadband Power Amplifier

New, high power density, design has allowed us to produce a 70 W 1 MHz to 1 GHz amplifier in a compact 3U package. With a minimum of 55 W of linear power this amplifier is ideal for RF immunity testing in a GTEM and for 3V/m testing with a wide range of available antenna.

Teseq NSG 4060 Low Frequency Immunity Test System

The Teseq NSG 4060 is an EMC immunity test system for the frequency range of 15 Hz - 150 kHz

EM Test CWS 500N4 Simulator for Conducted, Common-Mode Disturbances

EM Test CWS 500N4Simulator for conducted, common-mode disturbances, as per IEC 61000-4-16, IEC 61000-4-19 Annex C, 0Hz (DC) to 165kHz

EM Test CWS 500N1 Continuous Wave Simulator

EM Test CWS 500N1 Continuous Wave Simulator for IEC 61000-4-6

EM Test CWS 500N3 Test Generator

Key applications of the CWS 500N3 are in the automotive and aerospace area. Various international standards and MIL requirements call for magnetic field tests in the low frequency range. Apart from this the automotive industry requires conducted immunity tests with superposed sinusoidal signals on the DC supply voltage (ripple noise). For both applications the CWS 500N3 is the perfect equipment including everything in a single box, necessary for these tests. The CWS 500N3 meets requirements of SAE J1113-2, ISO 11452-8, DO 160D/E Section 18 and MIL-STD-461 D/E/F/G CS101, CS109 and RS101.

Haefely ONYX 30 ESD Simulator/Gun

The Haefely ONYX 30 ESD Simulator/Gun, 30kV has been specially designed to meet all latest international standards, including IEC61000-4-2 edition 2, and are the most ergonomic battery and AC power operated 30kV guns on the market. Test with confidence®.

Haefely ONYX 16 ESD Simulator/Gun

Haefely ONYX 16 ESD Simulator/Gun, 16kV has been specially designed to meet all latest international standards, including IEC61000-4-2 edition 2, and are the most ergonomic battery and AC power operated 16kV guns on the market.

Teseq NSG 437 Automotive ESD Simulator/Gun

Teseq NSG 437-AUTOMOTIVE ESD Simulator/Gun, 30kV includes: Discharge Pistol, IEC 61000-4-2 330 Ohm/150pF High Voltage Network, Mains adapter / charging unit 80 – 240VAC, Ground cable, User manual

EM Test ESD NX30 ESD Simulator/Gun

The EM Test ESD NX30 is an ESD tester to simulate ESD pulses at higher voltages up to 30 kV in both air and contact discharge mode. It satisfies requirements exceeding the EN/IEC 61000-4-2 test levels and complies with automotive test applications.

Teseq NSG 435 ESD Simulator/Gun

16.5kV Air, 9kV Contact

Teseq NSG 438 ESD Simulator/Gun

30kV ESD Simulator/Gun with built in charge remover

EMC Partner ESD3000 Handheld ESD Generator; up to 30KV

EMC Partner ESD3000 handheld ESD generator/tester with modular discharge circuits up to 30KV.

Teseq MFO-6502 Magnetic Field Generator

Automatic Power Line Frequency Magnetic Field

Teseq INA-4416 Soft Touch Contact Tip

Designed for Teseq NSG 438A Automotive

Teseq NSG 437 ESD Simulator/Gun

Teseq NSG 437 ESD Simulator/Gun, 30kV Includes: Discharge Pistol, IEC 61000-4-2 330 Ohm/150pF High Voltage Network, Mains adapter / charging unit 80 – 240VAC, Ground cable, User manual

Pearson 8705C Current Probe

The Pearson 8705C Current Probe for MIL-STD-461 CS114, CS115, CS116 supports a frequency Range 10 kHz to 400 MHz

CE Mark Product Package for IEC/EN 61000-4 Series Compliance

EM Test NX5, Teseq NSG 4070C-80, and 3ctest EDS 16H

A.H. Systems SAS-574 Double Ridge Guide Horn Antenna

The A.H. Systems Double Ridged Guide Horn is a broadband antenna that offers excellent performance over the frequency range of 18GHz to 40GHz. High gain, low VSWR, input handling capability up to 10 watts CW and rugged design make this horn antenna excellent for both immunity and emissions testing.

M Precision MiniZap-15 ESD Simulator

The MPL MZ15 ESD Simulator Gun for IEC 1000-4-2 compliance testing. Includes 150pF/330 ohm discharge network, TPA-1, TPA-2, TPC-2A discharge tips, battery charger, carrying case.

3ctest EDS 16H Electrostatic Discharge Simulator

Up to 16 kV, IEC/EN 61000-4-2 Compliance

Teseq ProfLine 2105

ProfLine 2105 is an accurate and flexible single-phase system designed to measure harmonics & flicker in accordance with IEC 61000-3-2 and IEC 61000-3-3.

EM Test DPA 503N 3-Phase Power Analyzer With Harmonics & Flicker

The DPA 503N is used for 3-phase applications but also supports single phase applications.

Teseq Profline 2103-240

The Teseq Profline 2103-240 is an accurate and flexible single phase system designed to measure harmonics & flicker in accordance with IEC 61000-3-2 and IEC 61000-3-3, supporting testing on products consuming up to 11 Arms and 92 A peak @ 230 VAC.

Teseq ProfLine 2130-208

The Teseq ProfLine 2130-208 is an accurate and flexible three phase system designed to measure harmonics & flicker in accordance with IEC 61000-3-2 and IEC 61000-3-3.

Teseq ProfLine 2105-400 5 kVA Single Phase Harmonics & Flicker Measuring System

The Teseq ProfLine 2105-400 is an accurate and flexible single phase system designed to measure harmonics & flicker in accordance with IEC 61000-3-2 and IEC 61000-3-3.

EM Test ACS 503N30 AC Voltage Source

The EM Test ACS 503N30 is a three-phase AC sources, specifically designed for harmonics and flicker testing.