Close
You have no items in your shopping cart.
Search

Keysight/Agilent E4418B Power Meter

Manufacturer part number: E4418B
9kHz to 110GHz, sensor dependent
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

OPTIONS
NamePurchase
ANZI Z540 CAL W DATA$0.00
MAINS PWR/RECHARCE BATTERY$0.00
PARALLEL REAR PANEL SENSOR INPUT$0.00
REAR PANEL SENSOR & PWR OUTPUT$0.00
DELETES 11730A SENSOR CABLE$0.00
REAR PANEL SENSOR & PWR OUTPUTS$0.00
RACKMOUNT KIT$0.00
RACKMOUNT$0.00
RACKMOUNT KIT$0.00

Key Features and Functions

The E4418B Power Meter is a low-cost, high-performance, single-channel, programmable power meter. It is fully compatible with the 8480 series of power sensors and the new E-series of power sensors. Depending upon which sensor is used, the E4418B can measure from -70dBm to +44dBm at frequencies from 100kHz to 110GHz. Designed for bench and automatic test equipment use (ATE), the E4418B makes fast (up to 100 readings per second with E-series sensors), accurate and repeatable power measurements.

  • ML CD:ops/prog/guides(COPY MASTERCOPY)
  • POWER CORD (7'6" BLK)AMER; (NEWARK)
  • KIT, LOCK LINK; 438A (HP)
  • OPT 1CM:RACKMOUNT KIT 34970A (HP)
  • CABLE, SENSOR; E4418A (HP)
  • POWER CABLE
  • CD-ROM, DOCUMENTATION
  • 9kHz to 110GHz, sensor dependent
  • Fast measurement speed (up to 200 readings per second, over the GPIB, with E-series sensors)
  • Speed improvement of x2 using the 8480 series power sensor (compared to the 437B)
  • No range-switching delays with 8480 series sensors, and only one fast-range switch point with E-series sensors
  • Code compatibility with 437B and 436A power meters
  • GPIB and RS232 connector for remote control of all functions
  • Internal rechargeable battery option provides up to 5.5 hours continuous use (option 001)
Description

Key Features and Functions

The E4418B Power Meter is a low-cost, high-performance, single-channel, programmable power meter. It is fully compatible with the 8480 series of power sensors and the new E-series of power sensors. Depending upon which sensor is used, the E4418B can measure from -70dBm to +44dBm at frequencies from 100kHz to 110GHz. Designed for bench and automatic test equipment use (ATE), the E4418B makes fast (up to 100 readings per second with E-series sensors), accurate and repeatable power measurements.

Product tags