Close
You have no items in your shopping cart.
Search

Keysight N2793A 10:1 Differential Probe

Manufacturer part number: N2793A
800 MHz
PURCHASE
Available QTY Price
New:   0
+ -
$0.00
Used:   0
+ -
$0.00 Configurations
X

Available Configurations

The N2793A differential probe provides superior high-speed differential signal measurements required for today’s high-speed power measurements, vehicle bus measurements and high-speed digital system designs.

The N2793A differential probes offer 10:1 attenuation setting, allowing them to be used for a broad range of applications. The probe comes with a variety of probe tip accessories for use with large and small components in tight places. The probe also comes with a DC blocking capacitor to block out unwanted DC components of the input signal.

The differential probes have an input resistance of 200 kΩ and the low input capacitance of 1 pF to minimize circuit loading. The N2793A probe is compatible with any oscilloscope with 50 Ω BNC input. The probe can be powered by any USB port on scope or computer, or by internal batteries (1x 9V battery included with each probe).

Features

  • Wide dynamic range for various applications: ±15V differential, ±30V common mode
  • High input resistance and low input capacitance for low probe loading: 200 kΩ//1 pF between inputs
  • Compatible with any 50 Ω BNC input, powered by a 9V battery or USB cable (included)
  • Ideal for high-speed power measurements, digital differential buses, and vehicle serial buses (CAN, LIN, Flexray)

 

 

  • 800 MHz
  • 10:1
  • Wide dynamic range for various applications: ±15V differential, ±30V common mode
  • High input resistance and low input capacitance for low probe loading: 200kΩ/1pF between inputs
  • Compatible with any 50? BNC input, powered by a 9V battery or USB cable (included)
  • Ideal for high-speed power measurements, digital differential buses and vehicle serial buses (CAN, LIN, Flexray)
  • Pincer Clips
  • User Guide
  • Micro IC Clips
  • Extension Leads ­– 0.8mm J-P 5cm
  • Extension Leads – 0.8mm, J-P 10cm
  • Dual Signal Pins – 16.8mm
  • Dual Signal Pins ­­­– 12.8mm
  • Single Signal Pins
  • USB Power – 2m
  • 9V Battery
Description

The N2793A differential probe provides superior high-speed differential signal measurements required for today’s high-speed power measurements, vehicle bus measurements and high-speed digital system designs.

The N2793A differential probes offer 10:1 attenuation setting, allowing them to be used for a broad range of applications. The probe comes with a variety of probe tip accessories for use with large and small components in tight places. The probe also comes with a DC blocking capacitor to block out unwanted DC components of the input signal.

The differential probes have an input resistance of 200 kΩ and the low input capacitance of 1 pF to minimize circuit loading. The N2793A probe is compatible with any oscilloscope with 50 Ω BNC input. The probe can be powered by any USB port on scope or computer, or by internal batteries (1x 9V battery included with each probe).

Features

  • Wide dynamic range for various applications: ±15V differential, ±30V common mode
  • High input resistance and low input capacitance for low probe loading: 200 kΩ//1 pF between inputs
  • Compatible with any 50 Ω BNC input, powered by a 9V battery or USB cable (included)
  • Ideal for high-speed power measurements, digital differential buses, and vehicle serial buses (CAN, LIN, Flexray)