Close
You have no items in your shopping cart.
Search

Keysight/Agilent 10070A 1:1, 1.5m Passive Probe

Manufacturer part number: 10070A
1:1, 1.5m Passive Probe
PURCHASE
AvailableQTYPrice
New:   1
+ -
$0.00
Used:   1
+ -
$46.00Configurations
X

Available Configurations

GENERAL PURPOSE PASSIVE PROBE
30003849
$46

The Keysight 10070 family probes are rugged, general-purpose probes designed to operate with the Keysight 54600 family of oscilloscopes. This family provides a range of high-quality probing solutions at a very reasonable price.

  • Ruggedized for general purpose measurement
  • General-purpose grabber (Retractable Hook Tip) hooks onto wires and test points for hands-off probing
  • Ground bayonet provides a short, flexible ground lead for high-frequency measurements
  • General-purpose alligator clip ground lead
  • IC tip mounts over probe tip for probing .1" spacing DIPs without shorting to adjacent pins
  • Color coding is achieved by placing orange, white, blue, or green identification tags on both ends of the probe cable
  • LENGTH (inc.cable): 1.5 m
  • DIVISION RATIO: 1:1
  • CIRCUIT LOADIN: (1 M ohm scope input) 1 M ohm; 70 pF
  • TYPICAL SCOPE BANDWIDTH: 20MHz
  • COMPENSATES OSCILLOSCOPE INPUT: High Impedance
  • Operating Temperature: -10 °C to 55 °C
  • Humidity: to 90%
  • Shock: 400g 1/2 sine wave on tip end; 50g 1/2 sine wave on BNC end
  • Propagation Delay: =7 ns (1.5m probe cable length)
Description

The Keysight 10070 family probes are rugged, general-purpose probes designed to operate with the Keysight 54600 family of oscilloscopes. This family provides a range of high-quality probing solutions at a very reasonable price.

  • Ruggedized for general purpose measurement
  • General-purpose grabber (Retractable Hook Tip) hooks onto wires and test points for hands-off probing
  • Ground bayonet provides a short, flexible ground lead for high-frequency measurements
  • General-purpose alligator clip ground lead
  • IC tip mounts over probe tip for probing .1" spacing DIPs without shorting to adjacent pins
  • Color coding is achieved by placing orange, white, blue, or green identification tags on both ends of the probe cable
  • LENGTH (inc.cable): 1.5 m
  • DIVISION RATIO: 1:1
  • CIRCUIT LOADIN: (1 M ohm scope input) 1 M ohm; 70 pF
  • TYPICAL SCOPE BANDWIDTH: 20MHz
  • COMPENSATES OSCILLOSCOPE INPUT: High Impedance