Close
You have no items in your shopping cart.

Keysight/Agilent N3383A PNA Network Analyzer

Manufacturer part number: N3383A
300 kHz to 9 GHz
PURCHASE
AvailableQTYPrice
New:   1
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

OPTIONS
NamePurchase
Time Domain$0.00
Configurable Test set$0.00
Attenuator$0.00
High Stability Timebase$0.00

The Keysight/Agilent N3383A PNA Network Analyzer is part of the PNA Series and provides a combination of speed and precision for today's demanding component test requirements. The PNA Series provides fast sweep speeds, wide dynamic range, low trace noise, and flexible connectivity.

Features:

  • 300 kHz to 9 GHz
  • 128 dB dynamic range at the test port
  • 143 dB dynamic range with direct receiver access
  • 35 µs/point sweep speed
  • USB controlled electronic calibration (ECal)
  • COM/DCOM and SCPI programming
  • System IF bandwidth range: 1 Hz to 40 kHz in a 1, 2, 3, 5, 7, 10 sequence up to 30 kHz, 35 kHz, 40 kHz, nominal
  • RF connectors: Type-N, female; 50 Ω, nominal
    • Connector center pin protrusion 0.204 to 0.207 in, characteristic
  • Probe power: 3-pin connector, male
    • Positive supply +15 VDC ±2%, 400 mA max, characteristic
    • Negative supply –12.6 VDC ±5%, 300 mA max, characteristic
  • Display: 21.3 cm (8.4 in) diagonal color active matrix LCD; 640 (horizontal) x 480 (vertical) resolution; 59.83 Hz vertical refresh rate; 31.41 Hz horizontal refresh rate
  • Display range:
    • Magnitude ±200 dB (at 20 dB/div), max
    • Phase ±180°, max
    • Polar 10 p-units, min; 1000 units, max
  • Display resolution
    • Magnitude 0.001 dB/div, min
    • Phase 0.01°/div, min
  • Marker resolution
    • Magnitude 0.001 dB, min
    • Phase 0.01°, min
    • Polar 0.01 m-unit, min; 0.01°,min
Description

The Keysight/Agilent N3383A PNA Network Analyzer is part of the PNA Series and provides a combination of speed and precision for today's demanding component test requirements. The PNA Series provides fast sweep speeds, wide dynamic range, low trace noise, and flexible connectivity.

Features:

  • 300 kHz to 9 GHz
  • 128 dB dynamic range at the test port
  • 143 dB dynamic range with direct receiver access
  • 35 µs/point sweep speed
  • USB controlled electronic calibration (ECal)
  • COM/DCOM and SCPI programming