Close
You have no items in your shopping cart.

Keysight/Agilent N4418A S-Parameter Test Set

Manufacturer part number: N4418A
50 MHz to 20 GHz
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   2
+ -
$3,195.00Configurations
X

Available Configurations

S-PARAMETER TEST SET
30002300
$3195
S-PARAMETER TEST SET
30002302
$3450

The Keysight N4418A S-parameter test set is a key component of a physical layer and balanced-measurement system. When combined with a Keysight 8719ES, 8720ES 8722ES Option H32, 8719ES, 8720ES H42 or 8722ES H44 vector network analyzer and an external PC equipped with an IEEE-488 GPIB card, this test set makes characterizing high-speed digital interconnects as well as, fully balanced or balanced-to-single-ended RF components a lot easier.

The N4418A S-parameter test set requires the N4425A Balanced Measurement System software or the N1930A Physical Layer Test System software for control of the 4-port VNA system, calibration, and data display and analysis.

Please note, this test set is not subject to a calibration test. The test set’s performance characteristics are parameters that the product is expected to meet before it leaves the factory. A functional test can verify proper performance of all microwave components within the test set.

The following features apply to a complete balanced-measurement system:

  • Display conventional (single-ended) and mixed-mode S-parameters
  • Re-normalize test data for non-50-ohm devices
  • Achieve high measurement accuracy with full four-port vector error correction
  • Calculate important parameters with powerful user-defined displays
  • Gain additional insight with time domain analysis option
  • Display conventional (single-ended) and mixed-mode S-parameters
  • Re-normalize test data for non-50-ohm devices
  • Achieve high measurement accuracy with full four-port vector error correction
  • Calculate important parameters with powerful user-defined displays
  • Gain additional insight with time domain analysis option
  • Manual
  • Assorted SMA cables
Description

The Keysight N4418A S-parameter test set is a key component of a physical layer and balanced-measurement system. When combined with a Keysight 8719ES, 8720ES 8722ES Option H32, 8719ES, 8720ES H42 or 8722ES H44 vector network analyzer and an external PC equipped with an IEEE-488 GPIB card, this test set makes characterizing high-speed digital interconnects as well as, fully balanced or balanced-to-single-ended RF components a lot easier.

The N4418A S-parameter test set requires the N4425A Balanced Measurement System software or the N1930A Physical Layer Test System software for control of the 4-port VNA system, calibration, and data display and analysis.

Please note, this test set is not subject to a calibration test. The test set’s performance characteristics are parameters that the product is expected to meet before it leaves the factory. A functional test can verify proper performance of all microwave components within the test set.

The following features apply to a complete balanced-measurement system:

  • Display conventional (single-ended) and mixed-mode S-parameters
  • Re-normalize test data for non-50-ohm devices
  • Achieve high measurement accuracy with full four-port vector error correction
  • Calculate important parameters with powerful user-defined displays
  • Gain additional insight with time domain analysis option