Close
You have no items in your shopping cart.

Com-Power LI-125A LISN

Manufacturer part number: LI-125A
150 kHz to 30 MHz, 50 microhenry / 25 Amps
PURCHASE
Available QTY Price
New:   0
+ -
$0.00
Used:   0
+ -
$0.00 Configurations
X

Available Configurations

Com-Power LI-125A Line Impedance Stabilization Network - 150 kHz to 30 MHz, 25 Amps

The Com-Power LI-125A Line Impedance Stabilization Network (LISN) provides the necessary measurement platform for performing power line conducted emissions compliance testing as required by most worldwide standards for commercial products.

The LI-125A is compliant with both CISPR 16-1-2 and ANSI C63.4. The LISN provides defined stable impedance and isolates the EUT from power source influences, thereby providing accurate and repeatable results. The LI-125A includes one pair of single-conductor networks, housed together, to be installed in series with each current-carrying conductor in a single-phase, dual-phase, or DC power system. A second LI-125A pair can be used to accommodate 3-phase power systems of Wye or Delta configurations. The LI-125A is equipped with IEC connector at the mains and NEMA 5-15R at EUT power output ports. This LISN uses air-core inductors to prevent saturation and permeability variation.

The mounting plate is left unpainted in order to facilitate connection to earth ground in its installation, which is essential due to high leakage current. It has a built in transient limiter for impedance matching, reduction of out-of-band emissions, and transient protection for your measurement instrument. All Com-Power LISNs are individually calibrated in compliance with the relevant requirements of CISPR 16-1-2 and ANSI C63.4. Impedance, Phase, Isolation, and Insertion Loss data are supplied with each unit, along with a calibration certificate

  • Standards: CISPR 16-1-2 & ANSI C63.4
  • Application: Power Line conducted emission tests
  • Frequency Range: 150kHz to 30MHz
  • Insertion Loss: <0.5dB,150kHz to 30MHz
  • Isolation: >40dB, 150kHz to 30MHz
  • RF Connector: 50&Omega Type-N(f)
  • Current Rating: 25A AC, 17A DC
  • Voltage Rating: 270VAC Line to Ground, 380VDC
  • Inductors: 50mh air-core
  • Mains & EUT Connections: IEC 60320 @ Mains and NEMA 5-15R @ EUT
  • Dimensions: 13x7x7in/33x17.7x17.7cm
  • Weight: 25lbs/11.3kg
  • Calibration Data & Certificate
  • Manual
  • Power cord
Description

Com-Power LI-125A Line Impedance Stabilization Network - 150 kHz to 30 MHz, 25 Amps

The Com-Power LI-125A Line Impedance Stabilization Network (LISN) provides the necessary measurement platform for performing power line conducted emissions compliance testing as required by most worldwide standards for commercial products.

The LI-125A is compliant with both CISPR 16-1-2 and ANSI C63.4. The LISN provides defined stable impedance and isolates the EUT from power source influences, thereby providing accurate and repeatable results. The LI-125A includes one pair of single-conductor networks, housed together, to be installed in series with each current-carrying conductor in a single-phase, dual-phase, or DC power system. A second LI-125A pair can be used to accommodate 3-phase power systems of Wye or Delta configurations. The LI-125A is equipped with IEC connector at the mains and NEMA 5-15R at EUT power output ports. This LISN uses air-core inductors to prevent saturation and permeability variation.

The mounting plate is left unpainted in order to facilitate connection to earth ground in its installation, which is essential due to high leakage current. It has a built in transient limiter for impedance matching, reduction of out-of-band emissions, and transient protection for your measurement instrument. All Com-Power LISNs are individually calibrated in compliance with the relevant requirements of CISPR 16-1-2 and ANSI C63.4. Impedance, Phase, Isolation, and Insertion Loss data are supplied with each unit, along with a calibration certificate