Voltage Input Range: 85-265 V rms, 50/60 Hz, 60 VA
Battery Life: Typical capacity is 6 hours continuous testing at 5 kV with a 100 M Ω load
Test Voltages: 250 V, 500 V, 1000 V, 2500 V, 5000 V
Accuracy (23 °C)
5000 V 2500 V 1000 V 500 V 250 V
±5% to 1 TΩ 500 GΩ 200 GΩ 100 GΩ 50 GΩ
±20% to 10 TΩ 5 TΩ 2 TΩ 1 TΩ 500 GΩ
Guard
2% error guarding 500 kΩ leakage with 100 MΩ load
Display Range
Digital display (3 digits) 10 kΩ to 15 TΩ:
Analogue display 100 kΩ to 1 TΩ
Short Circuit/Charge Current: 3 mA @ 5 kV
Capacitor Charge Time: <3 seconds per µF at 3 mA to 5 kV
Capacitor Discharge Time: <120 ms per µF to discharge from 5000 V to 50 V
Capacitance Measurement (above 500 V): 10 nF to 50 µF (dependent on test voltage)
Capacitance Measurement Accuracy (23 °C): ±5% ±5 nF
Voltage Output Accuracy (0 °C to 30 °C): +4%, -0% ±10 V of nominal test voltage at 1 GΩ load
Current Measurement Range: 0.01 nA to 5 mA
Current Measurement Accuracy (23 °C): ±5% ±0.2 nA at all voltages
Interference Rejection: 1 mA rms per 250 V test voltage up to a maximum of 2 mA
Timer Range: Counts up to 99 minutes from start of test
Test Regimes: Auto IR
Default Voltmeter Range: 50-600 V a.c. or d.c. Accuracy (23 ºC) + or -2% + or -1 V
Operating Temperature: -20 °C to 50 °C
Storage Temperature: -25 °C to 65 °C
Ingress Protection (lid closed): IP65
Humidity: 90% RH non-condensing at 40 °C
Safety: Meets the requirements of IEC61010-1 CATIV 600 V
EMC: Meets the requirements of IEC61326-1
Dimensions: 305 x 194 x 360 (mm) (12 x 7.6 x 14.2 inches)
Weight: 6.75 kg (15lb) approx
