Close
You have no items in your shopping cart.
Search

Megger PFL40A Power Cable Fault Locator System

Manufacturer part number: PFL40A
40kV
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

Key Features and Functions 

The Megger PFL40A Power Cable Fault Locator System is a high energy cable fault locating system offering up to 40kV of output voltage.

The Megger PFL40A Power Cable Fault Locator System provides a safe, efficient and easy–to-use solution for quickly identifying and isolating faults over a wide variety of power distribution cables.  Up to 2,000 joules of constant energy output is achieved over multiple voltage ranges of 8, 16 and 34 kV. The Megger PFL40A Power Cable Fault Locator System offers DC testing up to 40 kV, proof/burn up to 34 kV, arc reflection, impulse current, and an integrated MTDR graphical cable analysis system.

  • PFF40 with integral MTDR1
  • High-voltage shielded output cable, 15 m
  • Supply cable, 7 m
  • Flexible earth cable, 15 m
  • Wheel kit and Handle assembly
  • Earth rod
  • Interlock shorting plug
  • Cable bag
  • Instruction manual

Testing

  • Output: 0 - 40 kV (negative wrt earth) 25 mA constant
  • Resolution: 1 mA
  • Trip: Adjustable current trip
  • Metering: Analogue and digital

Low Voltage Pre-Location

MTDR100:

  • Range: 10 ranges; 100 m – 55 km (328 ft - 34 miles) 100 m - 220 km (328 ft - 137 miles) - transient methods
  • Pulse width: 50, 100, 200, 500 ns, 1, 2, 5,10 μs, and auto
  • Pulse Amplitude: 25 V into 50 Ω
  • Sample Rate: 100 Mhz
  • Resolution: 0.82 m (2.8 ft) (Vp=55%):
  • Display: 26.4 mm (10.4 in.), full XGA
  • Cursors: Dual independent control
  • Gain: 60 dB range in 5 dB Steps
  • Input: Impedance 50 Ω
  • Inputs: 1 x TDR/ARC, 1 x current impulse
  • Ports: 1 x printer/USB memory device
  • Software: CAS1 (Cable analysis software)

High Voltage Prelocation

  • Arc Reflection: 0-8/16/34 kV (optional 4 kV)
  • Impulse Current: 0-8/16/34 kV (optional 4 kV)

Pinpoint Fault Location

  • Surge: 0-8/16/34 kV (optional 4 kV) 1500 or 2000 joule
  • Impulse Sequence: Adjustable 3 – 30 seconds Single Shot
    • 1500 or 2000 joule
  • Voltage Decay : 0 - 40 kV (Optional Module)

Fault Conditioning

  • Proof/burn: 0 - 40 kV, 240 - 30 mA

Cables: PFL Cable Set

Environmental

  • Operating Temperature: -20 °C to +50 °C (-4 °F to 122 °F)
  • Storage Temperature: -20 °C to +55 °C (-4 °F to 131 °F)
  • Elevation: 1500 m (5000 ft) De-rate voltages at higher altitudes
  • Humidity: 5 to 95% RH non-condensing
  • Supply: 108-135 & 210-265 V AC (50/60 Hz)

IP Rating: IP54 (with top/back flaps closed)

Weight: 149 kgs / 328 lbs

Dimensions: 965 mm (H) x 536 mm (W) x 503 mm (D) 40 in (H) x 21 in (W) x 20 in (D)

Description

Key Features and Functions 

The Megger PFL40A Power Cable Fault Locator System is a high energy cable fault locating system offering up to 40kV of output voltage.

The Megger PFL40A Power Cable Fault Locator System provides a safe, efficient and easy–to-use solution for quickly identifying and isolating faults over a wide variety of power distribution cables.  Up to 2,000 joules of constant energy output is achieved over multiple voltage ranges of 8, 16 and 34 kV. The Megger PFL40A Power Cable Fault Locator System offers DC testing up to 40 kV, proof/burn up to 34 kV, arc reflection, impulse current, and an integrated MTDR graphical cable analysis system.