Military standard (MIL-STD) is used to ensure products meet certain requirements for the U.S. Department of Defense. The five types of defense standards include the manufacturing process, interface, design criteria, test method, and standard practices. Abiding by these standards allows for uniform engineering and technical demands unique to military requirements.
MIL-STD-461 defines limits and test procedures for military equipment relating to electromagnetic interference (EMI). It is extremely important for EMI to stay under control in military equipment to remain undetected and to not cause interference with other equipment. The standard can be broken down into four different categories, conducted emissions, conducted susceptibility, radiated emissions, and radiated susceptibility. Each category contains varying limits and procedures based on the application and where the equipment is located.
Avalon Test Equipment proudly offers a variety of test equipment from top manufacturers (EM Test, Teseq, and more) that meet multiple MIL-STDstandards. Easily select equipment by required standard and Test With Confidence®.
The EM Test ESD NX30 is an ESD tester to simulate ESD pulses at higher voltages up to 30 kV in both air and contact discharge mode. It satisfies requirements exceeding the EN/IEC 61000-4-2 test levels and complies with automotive test applications.
Key applications of the CWS 500N3 are in the automotive and aerospace area. Various international standards and MIL requirements call for magnetic field tests in the low frequency range. Apart from this the automotive industry requires conducted immunity tests with superposed sinusoidal signals on the DC supply voltage (ripple noise). For both applications the CWS 500N3 is the perfect equipment including everything in a single box, necessary for these tests. The CWS 500N3 meets requirements of SAE J1113-2, ISO 11452-8, DO 160D/E Section 18 and MIL-STD-461 D/E/F/G CS101, CS109 and RS101.
Haefely ONYX 16 ESD Simulator/Gun, 16kV has been specially designed to meet all latest international standards, including IEC61000-4-2 edition 2, and are the most ergonomic battery and AC power operated 16kV guns on the market.
The ITS 6006 consist of an integrated RF signal generator, RF switch and EUT monitoring interfaces. The unit is designed for various radiated EMC applications in the 80 MHz to 6 GHz frequency range. In addition to the generator, the system includes the AM and PM modulators necessary for EMC testing. The second generation, called ITS 6006B, includes 3 freely configurable pulse modulators (1 µs to 200 s) for radar pulse profiles as required e.g. by Ford FMC1278 or VW TL81000. The RF signal can be switched to one of four outputs, where up to four power amplifiers can be connected directly. Two RF switches are supplied for combining four amplifier into two antenna paths.
