Close
You have no items in your shopping cart.

Keysight N6700B Modular System Power Supplies

Manufacturer part number: N6700B
Low-Profile Modular Power System Mainframe, 400W, 4 Slots
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

Automated test equipment (ATE) systems often require more than one power source. The Keysight N6700 Series provides up to four outputs per mainframe. An independent module is the source for each output, allowing for the customization of voltage, current, and performance. DC electronic load modules are also available, allowing testing of power sources in the same 1U high mainframe.

Features

  • Choose from 400, 600, or 1200 W mainframe
  • Modular solution with 1U low-profile
  • Up to four outputs per mainframe
  • Mix and match module power and performance levels
  • Choose modules from three levels of performance
  • Sink current with DC electronic load modules
  • Fast command processing and settling times
  • Interfaces available — LAN (LXI Core), USB, GPIB
  • Data Storage: 8 Mbyte
  • Command Processing Time: ≤ 1 ms from receipt of command to start of output change
  • Digital Power Characteristics
    • Maximum Voltage Ratings: +16.5 VDC/− 5 VDC between pins (pin 8 is internally connected to chassis ground)
    • Pins 1 and 2 as FLT output: Maximum low-level output voltage = 0.5 V @ 4 mA; Maximum low-level sink current = 4 mA; Typical high-level leakage current = 1 mA @ 16.5 VDC
    • Pins 1 - 7 as Digital/Trigger Outputs (Pin 8 = common): Maximum low-level output voltage = 0.5 V @ 4 mA; 1 V @ 50 mA; 1.75 V @ 100 mA; Maximum low-level sink current = 100 mA; Typical high-level leakage current = 0.8 mA @ 16.5 VDC
    • Pins 1 7 as Tigital Trigger Inputs and p 3 as INH Input (pin 8 = common): Maximum low-level input voltage = 0.8 V; Minimum high-level input voltage = 2 V; Typical low-level current = 2 mA @ 0 V (internal 2.2k pull-up); Typical high-level leakage current = 0.12 mA @ 16.5 VDC
  • Interface Capabilities
    • GPIB: SCPI - 1993, IEEE 488.2 compliant interface
    • LXI Compliance: LXI Core 2011 - applies to N6700C, N6701C, N6702C, and N6705C LXI units Class C - applies to N6700B, N6701A, N6702A, and N6705B LXI units
    • USB 2.0: Requires Keysight IO Library version M.01.01 or 14.0 and up
    • 10/100/1000 LAN: Requires Keysight IO Library version L.01.01 or 14.0 and up
    • Built-in Web Server: Requires a web browser
  • Environmental Conditions
    • Operating Environment: Indoor use, installation category II (for AC input), pollution degree 2
    • Temperature Range: 0° C to 55° C (output current is derated 1% per °C above 40° C ambient temperature)
    • Relative Humidity: Up to 95%
    • Altitude: Up to 2000 meters
    • Storage Temperature: -30° C to 70° C
  • AC Input
    • Input Ratings: ~ 100 VAC – 240 VAC; 50/60/400Hz
    • Input Ranges: 86–264 VAC; 47–63Hz; 380–420 Hz
    • Power Consumption: 1000 VA (N6700B/C)
    • Power Factor: 0.99 @ nominal input and rated power
    • Fuse: Internal fuse, not customer accessible
  • Weight: 12.73 kg (28 lbs)
  • Dimensions: 560.2 x 549.7 x 432.5 x 482.6 mm (22.06 x 21.64 x 19 in)
Description

Automated test equipment (ATE) systems often require more than one power source. The Keysight N6700 Series provides up to four outputs per mainframe. An independent module is the source for each output, allowing for the customization of voltage, current, and performance. DC electronic load modules are also available, allowing testing of power sources in the same 1U high mainframe.

Features

  • Choose from 400, 600, or 1200 W mainframe
  • Modular solution with 1U low-profile
  • Up to four outputs per mainframe
  • Mix and match module power and performance levels
  • Choose modules from three levels of performance
  • Sink current with DC electronic load modules
  • Fast command processing and settling times
  • Interfaces available — LAN (LXI Core), USB, GPIB