Close
You have no items in your shopping cart.

Keysight N9010A EXA Signal Analyzer

Manufacturer part number: N9010A
9 kHz–3.6 GHz
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

OPTIONS
NamePurchase
Electronic attenuator, 3.6GHz$0.00
J.83 Annex B measurement application, fi$0.00
Vector signal analysis measurement appli$0.00
Noise Figure Measurement application$0.00
Frequency range, 10 Hz to 7 GHz$0.00
Analysis bandwidth, 25MHz$0.00
Operating system, Windows Embedded Stand$0.00
Calibration Certificate$0.00
10 Hz to 26.5 GHz$0.00
N9060A-2FP option$0.00
Amplitude Correction and Limit Lines$0.00
TOI and Harmonics$0.00
ACP 18 Carrier Measurement$0.00
TV Trigger and IQ Analyzer Enhancement$0.00
Zero Span, Register, Trace & Spurious Enhancements$0.00
Remote language compatibility$0.00
GSM/EDGE Measurement Application$0.00
Combined GSM/EDGE Measurement Application$0.00
LTE-FDD Msmt Application, Perpetual lic$0.00
LTE TDD Msmt Application, Perpetual lice$0.00
Preamp: 100kHz to 7.0 GHz$0.00
Y-axis Screen Video Output$0.00
Spectrum Analyzer Measurements$0.00
WLAN 802.11a/b/g Measurement Application$0.00
WLAN 802.11n Measurement Application$0.00
INTEL SSDSC2BB080G4 ATA DEVICE$0.00
Intel(R) Core(TM) i7 CPU L 620 @ 2GHz, 8GB$0.00

The Keysight N9010A is a good tool to monitor emissions for FCC and other compliance standards. Avalon Test Equipment offers this 9 kHz to 3.6 GHz signal analyzer in packages with antennas, LISN's, and near field probe sets to easily measure and focus in on problem areas (frequencies).

Features:

  • ISO 17025 Calibration
  • 25 MHz Bandwidth
  • -170 dBm DANL at 1 GHz
  • Max Dynamic Range 3rd order @ 1 GHz: 112 dB
  • Standard Attenuator Range; 60 dB (10 dB Steps)
  • Measure the smallest signals in the presence of large ones with best-in-class level accuracy, DANL & TOI
  • Perform power measurements quickly at discrete frequency points with list-sweep mode
  • Simplify testing with X-Series measurement apps: phase noise, noise figure, analog demodulation, wireless communications & more

Temperature Range

  • Operating: 0 to 55 °C
  • Storage: –40 to 70 °C

Power Requirements

  • 100 to 120 V, 50/60/400 Hz
  • 220 to 240 V, 50/60 Hz

Power Consumption

  • On: 350 W Max.
  • Standby: 20 W

Display

  • Resolution: 1024 x 768, XGA
  • Size: 213 mm (804 in.) diagonal (nominal)

Data Storage

  • Height: 177 mm (7.0 in)
  • Width: 426 mm (16.8 in)
  • Length: 368 mm (14.5 in)
Description

The Keysight N9010A is a good tool to monitor emissions for FCC and other compliance standards. Avalon Test Equipment offers this 9 kHz to 3.6 GHz signal analyzer in packages with antennas, LISN's, and near field probe sets to easily measure and focus in on problem areas (frequencies).

Features:

  • ISO 17025 Calibration
  • 25 MHz Bandwidth
  • -170 dBm DANL at 1 GHz
  • Max Dynamic Range 3rd order @ 1 GHz: 112 dB
  • Standard Attenuator Range; 60 dB (10 dB Steps)
  • Measure the smallest signals in the presence of large ones with best-in-class level accuracy, DANL & TOI
  • Perform power measurements quickly at discrete frequency points with list-sweep mode
  • Simplify testing with X-Series measurement apps: phase noise, noise figure, analog demodulation, wireless communications & more