Close
You have no items in your shopping cart.
Search

NH Research 9410-48 Regenerative Grid Simulator

Manufacturer part number: 9410-48
Grid Simulator (4 Quadrant AC source) for Grid-Tied Inverter Testing, Vehicle to Grid (V2G) Testing, AC Power Product Testing, & More! 48kW model from the 9410 series.
PURCHASE
Available QTY Price
New:   0
+ -
$0.00
Used:   0
+ -
$0.00 Configurations
X

Available Configurations

Key Features and Functions

The 9410 from NH Research is a four-quadrant (bi-directional) AC/DC source with selectable phase outputs, a built-in waveform-digitizing measurement system and robust line disturbance creation tools. When used in the regenerative (sink) mode, it sends returned power back to the facility mains rather than being dissipated as heat. The most frequent application of the 9410 is use as a grid simulator for testing PV inverters and other grid-tied products for compliance to industry standards.

Features

  • 8 models – 4kW/10.5kVA to 96kW/252kVA
  • Output AC Voltage Ranges – 175, 350VRMS L-N
  • Output DC Voltage – 200, 400VDC
  • Output Frequency – DC, 30 to 100Hz
  • Programmable 1, 2 or 3-Phase modes
  • Full 4 quadrant AC source operation
  • High resolution waveform capture on all V & I
  • Sink power regenerated back to facility
  • 9” Touch-Panel user interface
  • SCPI programming & NI LabVIEW drivers

Advantages

  • Bi-directional AC – Inverter testing & μgrid simulation
  • More reactive power per kW
  • Simplifies automated test stand development
    – Software selectable 1, 2, or 3 Phase operation
    – Isolated digital inputs & outputs
    – Built-in SW watchdog & safety limits
  • Software tools to shorten test development time
    – PC-based tools & NI certified drivers
    – NI certified LabVIEW & IVI-C/IVI-COM drivers
    – Optional: Enerchron® test sequencer

Benefits

  • Regenerative, returns greater than 85% of power to the facility, which provides significant electrical savings.
  • Field upgradeable to higher power
  • Fully emulate any utility/grid condition
  • Simulate non-ideal Phase phase angles (A-B & A-C)
Model Number           9410-48    
AC Output Ratings
Phases/Output Channels     1,2, or 3
Power, Max (1Φ or 3Φ)           48kW/96kVA    
Current Ranges (RMS per Φ)           24, 120 A/Φ    
Current Ranges (RMS 1Φ)           72, 360A    
Peak Current 3 X Max RMS
Frequency 30-100Hz (option up to 880Hz)
Voltage Ranges, L-N 175, 350V (Split Phase 250V Max)
  Accuracy 0.2% Set + 0.2% Rng
  Resolution 0.005% Rng
  Distortion (THD) <1% @ 50/60Hz (Full power into resistive load at 480 VRMS (L-L))
  Response Rate 1V/µS (10% to 90% measured at 90 degree turn-on into resistive load)
  Custom Waveforms Sine, n-Step Sine, Triangle, Clipped-Sine, Arbitrary (user defined)
  Phase Angle Control 0 to 359 degrees/1 degree resolution
DC Output Ratings
Power Max (1ch or 3ch)           48kW    
Current Ranges (Per Ch.)           24, 120A/CH    
Current Ranges (Per System)           72, 360A    
Voltage Ranges 200, 400 VDC
  Accuracy 0.2% Set + 0.2% Range
  Ripple <800mV RMS
AC & DC Measurements
Peak Voltage 250, 500V
  Accuracy (AC RMS) 0.1% Rdg + 0.06% Rng
  Accuracy (DC) 0.1% Rdg + 0.1% Rng
  Accuracy (Peak) 0.5% Rdg + 0.2% Rng
  Resolution 0.005% Rng
Peak Current (per Ch.)           80, 400A    
  Accuracy (AC RMS) 0.2% Rdg + 0.06% Rng
  Accuracy (DC) 0.2% Rdg + 0.06% Rng
  Accuracy (Peak) 0.5% Rdg + 0.2% Rng
  Resolution 0.005% Rng
Peak Power V Range x I Range
  Accuracy (AC RMS) 0.2% Rdg + 0.06% Rng
  Resolution 0.005% Rng
Additional Measurements Energy (Ah, kWh, kVAh), AC Crest Factor, AC Power Factor, Waveform Capture
Physical
Enclosure           Cabinet    
Size (HxWxD)           78 x 23 x 30″/
1981 x 584 x 762mm
   
Weight           855lbs/
388kg
   

Description

Key Features and Functions

The 9410 from NH Research is a four-quadrant (bi-directional) AC/DC source with selectable phase outputs, a built-in waveform-digitizing measurement system and robust line disturbance creation tools. When used in the regenerative (sink) mode, it sends returned power back to the facility mains rather than being dissipated as heat. The most frequent application of the 9410 is use as a grid simulator for testing PV inverters and other grid-tied products for compliance to industry standards.

Features

  • 8 models – 4kW/10.5kVA to 96kW/252kVA
  • Output AC Voltage Ranges – 175, 350VRMS L-N
  • Output DC Voltage – 200, 400VDC
  • Output Frequency – DC, 30 to 100Hz
  • Programmable 1, 2 or 3-Phase modes
  • Full 4 quadrant AC source operation
  • High resolution waveform capture on all V & I
  • Sink power regenerated back to facility
  • 9” Touch-Panel user interface
  • SCPI programming & NI LabVIEW drivers

Advantages

  • Bi-directional AC – Inverter testing & μgrid simulation
  • More reactive power per kW
  • Simplifies automated test stand development
    – Software selectable 1, 2, or 3 Phase operation
    – Isolated digital inputs & outputs
    – Built-in SW watchdog & safety limits
  • Software tools to shorten test development time
    – PC-based tools & NI certified drivers
    – NI certified LabVIEW & IVI-C/IVI-COM drivers
    – Optional: Enerchron® test sequencer

Benefits

  • Regenerative, returns greater than 85% of power to the facility, which provides significant electrical savings.
  • Field upgradeable to higher power
  • Fully emulate any utility/grid condition
  • Simulate non-ideal Phase phase angles (A-B & A-C)