NoiseKen INS-4040 Impulse Noise Simulator; 40kV

Manufacturer part number: INS-4040

The NoiseKen INS-4040 is able to reproduce fast rise-up noises to evaluate equipment performance during line noises.

PURCHASE

Available	QTY	Price
New: 0	Qty: + -	$0.00
Used: 0	Qty: + -	$0.00	Configurations

Available Configurations

Overview
Specifications
Standards

NoiseKen INS-4040 Impulse Noise Simulator

The INS-4040 is designed for reliability, durability, and ease of use. It is able to reproduce and simulate noise to test electronic equipment for malfunctions and proper operation with noise influence. The INS-4040 can generate Wideband frequency spectrum accompanied with ON/OFF inductive load and switch relay. The reproduction of line noises, which are intruded to power supply lines or induced noises onto telecommunication lines help evaluate electronic equipment performance making sure products are able to withstand real world phenomena.

Features:

Automatic ramp operation for output voltage, phase angle and repetition period
Floating output
Coupling mode selection by plugging the supplied coaxial connector to the selected port
Easily changeable mercury relay unit
Built-in 50 ohm terminator
Up to 5 test settings stored in the internal memory
Easily changeable outlet panels
CE marked

Output Voltage:0.01 ~ 4.00KV ±10% with 50 ohm load, 10V step
Polarity: Positive or negative
Memory: Up to 5 test settings
Power Capacity of Equipment Under Test: AC 240V, DC60V, Single phase, DC60V 16A
Power Supply: AC100 ~ 240V 50/60H
Power Consumption: 140VA
Operating Temperature and Humidity:15~35°C / 25~75% (No dewing shall occur.)
Dimensions: (W) 430 X (H) 249 X (D) 420 mm(Projections excluded)
Weight: Approx. 19kgs

Square Wave

Pulse width: 50ns, 100 ns, 200ns, 250ns, 400ns, and any combination thereof, maximum width, 1µs or 10ns±3ns (the shortest connection)
Pulse Rise Time: < 1ns
Output Impedance: 50 ohm system (53.5 ohm)

Pulse Repetition Mode

Variable:16ms ~ 999ms±10%, 1ms step
Phase: 50 or 60Hz, Injection phase angle 0~359°, 1° step, synchronized with L1 - L2 power line frequency for EUT
Ext: >16ms, Pulse width>1ms TTL/Open collector negative logic
1 Shot: Single pulse injection to the angle selected by PHASE setting, or irrelevant with the EUT line frequency

IEC 61000-4-4

Description

NoiseKen INS-4040 Impulse Noise Simulator

Features:

Automatic ramp operation for output voltage, phase angle and repetition period
Floating output
Coupling mode selection by plugging the supplied coaxial connector to the selected port
Easily changeable mercury relay unit
Built-in 50 ohm terminator
Up to 5 test settings stored in the internal memory
Easily changeable outlet panels
CE marked

Product tags