Close
You have no items in your shopping cart.

Com-Power PAM-6000 Preamplifier

Manufacturer part number: PAM-6000
The Com-Power PAM-6000 1 - 6 GHz High Gain Preamplifier is intended for improving measurement system sensitivity during EMC compliance testing. It has a frequency range of 1 GHz to 6 GHz. It has gain of 30 dB. Therefore, It amplifies the signals that were previously hidden below the noise floor of the EMI receiver so that it can be seen and measured.
PURCHASE
AvailableQTYPrice
New:   1
+ -
$2,005.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

The Com-Power PAM-6000 1 - 6 GHz High Gain Preamplifier is intended for improving measurement system sensitivity during EMC compliance testing. It has a frequency range of 1 GHz to 6 GHz. It has gain of 30 dB. Therefore, It amplifies the signals that were previously hidden below the noise floor of the EMI receiver so that it can be seen and measured.

The PAM-6000 has a small gain variation of ±1.5 dB. It can be powered by the rechargeable NimH batteries (included) when an external power source is not available.

Features:

  • Broadband Frequency Range of 1 GHz - 6 GHz
  • Low Noise Figure: 4 dB typical
  • High Gain: 30 dB
  • Low VSWR: 2:1 Input/1.8:1 Output
  • Output Power: +13 dBm @ 1 dB compression
  • Flatness: ± 1.5 dB
  • Reverse Isolation: Greater than 30 dB
  • Impedance: 50 Ohms
  • Connector: N-type (f)
  • Frequency: 1 GHz - 6 GHz
  • Application: EMI / EMC Measurements
  • Gain: 30 dB
  • Gain Flatness: ± 1.5 dB
  • Max RF Input: +2 dBm
  • DC Input: 10 VDC, max.
  • Impedance I/O: 50 Ohms
  • Connector Type: N (f)
  • Battery Type: 6V NimH
  • Power: 6 VDC, 500 mA
  • Size: 7.5" x 5" x 3" / 9 x13 x 7.6 cm
  • Weight: 2.5 lbs. (5.5 kg)
Description

The Com-Power PAM-6000 1 - 6 GHz High Gain Preamplifier is intended for improving measurement system sensitivity during EMC compliance testing. It has a frequency range of 1 GHz to 6 GHz. It has gain of 30 dB. Therefore, It amplifies the signals that were previously hidden below the noise floor of the EMI receiver so that it can be seen and measured.

The PAM-6000 has a small gain variation of ±1.5 dB. It can be powered by the rechargeable NimH batteries (included) when an external power source is not available.

Features:

  • Broadband Frequency Range of 1 GHz - 6 GHz
  • Low Noise Figure: 4 dB typical
  • High Gain: 30 dB
  • Low VSWR: 2:1 Input/1.8:1 Output
  • Output Power: +13 dBm @ 1 dB compression
  • Flatness: ± 1.5 dB
  • Reverse Isolation: Greater than 30 dB
  • Impedance: 50 Ohms
  • Connector: N-type (f)
Product tags