Close
You have no items in your shopping cart.

PIM Accessories

Passive Intermodulation (PIM) arises when there are two or more signals present in a passive non-linear device. Interference caused by PIM decreases a cell's receive sensitivity and can block phone calls completely. Consequently, PIM is a serious issue for cellular providers because it decreases reliability, data rate, and capacity of their networks. The cell creating the interference can also affect nearby receivers. It can be very challenging to find the source of PIM because it can be caused by internal factors (damaged or loose cables, dirty connectors, etc.) as well as external factors (fences, metal-to-metal contact, rusty bolts, etc.). An on-site PIM test is a measure of linearity and construction quality that needs to be done at or above the original transmitter power levels in order to ensure the test exposes PIM issues. PIM testing in conjunction with line sweeping is an important method for carriers to assure maximum network potential. The PIM test measures system linearity, while sweep testing addresses a return loss measurement that detects impedance.

Avalon Test Equipment carries a variety of PIM accessories to complement PIM testing equipment.

For all of the PIM accessories you need, view our PIM accessory kits for Anritsu and Kaelus.

Rent or purchase PIM accessories from Avalon so you can Test With Confidence®.

Do you need to be trained on PIM or sweep? We have classes for PIM fundamentalsexternal PIM, and sweep fundamentals.

Request an RMA for a PIM gear calibration or repair. We guarantee a 24-hour turnaround on calibrations!

Read More

Read Less

Avalon Anritsu PIM Accessory Kit

Backpack Accessory Kit for Anritsu PIM Masters™

Avalon Kaelus PIM Accessory Kit

Backpack Accessory Kit for Kaelus PIM Analyzers

Avalon Low PIM Adapter Cable

7/16 to 4.3, 15 Feet

Avalon Low PIM Termination

700 MHz–2600 MHz, 10 W

Kaelus iAK-0060A Premium Accessory Kit

iPA premium accessory Kit

Kaelus RTF 2000A Range To Fault Module

Range To Fault (RTF) is an exciting new technology from Kaelus that enables operators to accurately measure the location of PIM and Return Loss faults in their RF infrastructure.

Kaelus SI-20A Low Passive Intermodulation Termination

The SI-20A provides a means of terminating cables and test ports without generating significant levels of intermodulation products.

Kaelus SI-30A Low Passive Intermodulation Termination

The SI-30A provides a means of terminating cables and test ports without generating significant levels of intermodulation products.

Anritsu 15NN50-3.0C Phase Stable Cable

Test Port Extension Cable, Armored, 3.0 meters, DC to 6 GHz, N(m) - N(m), 50 Ω

Anritsu 15RNFN50-1.5-R Phase Stable Cable

Test Port Extension Cable, Armored, with Reinforced Grip, 1.5 meters, N(m) - N(f), 6 GHz, 50 Ω

ConcealFab Absorber Kit Larger Antenna Bundle

Absorber Kit Larger Antenna Bundle

Cuming Microwave 700 MHz-3 GHz Fire Retardant Isolation Foam

700 MHZ-3 GHZ ISOLATION FOAM, C-645-FR, 1X24X24"

Innowave RF 50W Low-PIM Ultra Wideband Terminations / Loads

50W Low-PIM Ultra Wideband Terminations / Loads

Innowave RF 60W Low-PIM Ultra Wideband Terminations / Loads

60W Low-PIM Ultra Wideband Terminations / Loads

Innowave RF 80W Low-PIM Ultra Wideband Terminations / Loads

80W Low-PIM Ultra Wideband Terminations / Loads

Innowave RF 150W Low-PIM Ultra Wideband Terminations / Loads

150W Low-PIM Ultra Wideband Terminations / Loads

Innowave RF 200W Ultra Low-PIM Wideband Terminations / Loads

200W Ultra Low-PIM Wideband Terminations / Loads

InnowaveRF Low PIM Termination, 200W, 4.3/10(f), 600-2700MHz

Low PIM Termination, 200W, 4.3/10(f), 600-2700MHz