Close
You have no items in your shopping cart.
Search

Raymond EMC Filters

Raymond EMC’s powerline filters and signal filters range from 0.5 amp to 600 amp, and can be used with all our products.
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

TWO-YEAR WARRANTY

They can supply both styles of filter – powerline filters and signal filters – with NPT pipe nipples and flange nuts for mounting directly on their shielded chambers and QuietShield Boxes. Alternately, both styles of filter can be remotely mounted with shielded conduit running between the clean end of the filter and the QuietShield Box or anechoic chamber.

Compliant with industry standards

UL 1283: Standard for electromagnetic interference filters

MIL-STD-220C: Military standard: Method of insertion loss measurement (2009)

MIL-F-15733: Performance specification: Filters and capacitors, radio frequency interference, general specification (2010)

Powerline Filter Specifications:

  • Current rating: 5 amp to 600 amp
  • Frequency: 0–60 Hz, 400 Hz option available
  • Voltage rating: 120/208/277/480 VAC, 600/1000 VDC
  • Insertion loss: 100 dB minimum from 14K Hz to 10 Ghz under full load per MIL-STD-220C
  • Case: Cold-rolled steel
  • Construction: Input and output terminals shall be completely enclosures in RF shielded compartments. Cover on the input compartments shall be screw-down type
  • Finish: Corrosion-resistant suitable plating
  • Terminals: High temperature ceramic

Standard Sizes

  • Dual 30 amp 120/208/277/480/600 VAC, 60 Hz
  • Dual 60 amp 120/208/277, 60 Hz
  • Single 100 amp 120/208/277, 60 Hz
  • Single 225 amp 120/208/277, 60 Hz

Signal Filter Specifications:

  • Standard amperage rating: 0.5 amp, 1 amp, 5 amp
  • Voltage: 120 VAC
  • Frequency: 0-60 Hz
  • Voltage drop: 2% maximum at full rated unity power factor load
  • Current overload: 140% maximum current rating for 15 minutes maximum
  • Dielectric withstand voltage: 2 X rated voltage
  • Insulation resistance: As per MIL-F-15733
  • Insertion loss: 100 dB minimum from 14 KHz to 10 Ghz when measured to MIL-STD-220-A
Description

TWO-YEAR WARRANTY

They can supply both styles of filter – powerline filters and signal filters – with NPT pipe nipples and flange nuts for mounting directly on their shielded chambers and QuietShield Boxes. Alternately, both styles of filter can be remotely mounted with shielded conduit running between the clean end of the filter and the QuietShield Box or anechoic chamber.

Compliant with industry standards

UL 1283: Standard for electromagnetic interference filters

MIL-STD-220C: Military standard: Method of insertion loss measurement (2009)

MIL-F-15733: Performance specification: Filters and capacitors, radio frequency interference, general specification (2010)

Product tags