RF & Microwave Accessories

The Keysight 85131E is a 96.5 cm (38 in) long flexible cable with a 3.5 mm female to PSC-3.5 mm female connector.

85132E is a 97.2 cm (38.25 in) cable with a 3.5 mm female to 7 mm female connector

Keysight N6314A Type-N 50 Ohm RF Cable

85133F is a 63 cm (25 in) set composed of a 2.4 mm female to PSC-2.4 mm female connector and a 2.4 mm female to 2.4 mm male connector.

The Keysight N4697F is a 62 cm (24 in) long flexible cable set composed of a 1.85 mm female to 1.85 mm female connector and a 1.85 mm female to 1.85 mm male connector.

Converts the (unbalanced) BNC configuration to a (balanced) binding posts configuration. It is used to measure a balanced device using an unbalanced measurement instrument.

Converts the (unbalanced) BNC configuration to a (balanced) binding posts configuration.

Keysight 11062A Kelvin Clip Set

The Keysight kelvin probe set consists of two gold-plated flat tweezers with special gripping surfaces.

Test leads extend the measurement port with a 4-Terminal Pair configuration.

Designed to operate specifically with the 4349A/B. It is used to connect the 4349A/B and the DUT.

The Keysight U1782B is a tweezer to be used with the U1700 Series Handheld Capacitor and Handheld LCR Meters

For use with handheld capacitance and LCR meters

Converts the (unbalanced) BNC configuration to a (balanced) binding posts configuration.

The 16314A converts the (unbalanced) 4-Terminal pair configuration to a (balanced) binding posts configuration.

A standard resistor set consisting of nine precision resistor standards which range from 1 mΩ to 100 kΩ.

Designed to operate with high frequency LCR meters and impedance analyzers.

940mm Kelvin/Alligator Clip Lead has been designed to operate specifically with the LCR Meter and impedance analysers.

Test leads extend the measurement port with a 4-Terminal Pair configuration.