Close
You have no items in your shopping cart.

Fujikura 70S+ Fusion Splicer

Manufacturer part number: 70S+
The world’s fastest and most robust core alignment fusion splicer.
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

OPTIONS
NamePurchase
CT-30: High precision fiber cleaver$1,058.40
AD-30A Adapter Plate$0.00

Available to Rent!

The Fujikura 70S+ is the world’s fastest and most robust core alignment fusion splicer. Incorporating the proven ruggedized features pioneered by Fujikura, the 70S+ has added automated and enhanced user control features to increase splicing efficiency. A user-programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splicing process and opening upon splice completion. Fully programmable “auto open sheath clamps” open one or both sheath clamps, after the tensile test, to prepare the fiber for removal. A new automated “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 13-second shrink time. The result is a total splice process time of approximately 21 seconds! Ruggedness and durability are greatly enhanced by a mirror-less optical system and a "severe-impact resistant" monitor. Battery capacity is now 200 splices/shrinks.

An innovative transit case doubles as a built-in or mobile workstation and makes splicing easier than ever before. In an industry first, the 70S+ is also equipped with Bluetooth®

Features:

  • Automated Wind-Protector
  • Minimum manual operation, Splice in 4 steps
  • Multi-functional carrying case with the integrated work system
  • Absolute robustness
  • Bluetooth capability connection
  • AC adapter
  • AC power cord
  • Carrying case
  • Spare electrodes
  • Instructional manual CD
  • Quick reference guide
  • Warning and cautions
  • USB cable
  • Sleeve loader
  • Alcohol pot
  • Screw driver
  • High precision single fiber cleave
  • High precision fiber cleaver
  • Thermal jacket stripper
  • Protection sleeve

Applicable fibers

  • Single / SMF (G.652/657), MMF (G.651), DSF (G.653), NZDSF (G.655)

Cladding dia. / Sheath dia.

  • 80-150μm / 100-3000μm

Cleave length

  • 5mm to 16mm with sheath clamp

Splice mode / heating mode

  • Total 100 splice modes / 30 heating modes

Typical splice loss

  • 0.02dB (SM), 0.01dB (MM), 0.04dB (DSF) and 0.04dB (NZDS) Measured by cut-back method relevant to ITU-T and IEC standards.

Return loss

  • >>60dB

Attenuation splice function

  • Intentional high splice loss of 0.1dB to 15dB(0.1dB step)can be made for an in-line fixed attenuator.

Typical splice time

  • 6sec ULTRA FAST 7sec SM FAST, 10sec SM AUTO

Typical tube heating time

  • 13sec FP-03,coating dia.250μm 14sec FP-03,coating dia.900μm 9sec Slim 60mm ,coating dia.250μm

Splice result storage

  • Last 20,000 splices

Viewing methods / magnification

  • 2 axis CMOS camera with 4.73” color LCD. X / Y (320X magnification), or both X and Y simultaneously (200X magnification)

Tension test

  • 60mm, 40mm and Fujikura micro sleeves

No. of splice / heating per battery full charge*1

  • Typical 200 cycles with BTR-09

Electrode life

  • 5000 splices

Wireless connectivity

  • Wireless technical standard : Bluetooth®4.1*³   OS : Andoroid 5.0 or above, ios 8.0 or above (iphone6 above)

Size / weight

  • 146W x 159D x 150H (mm) / 2.7kg (including battery)

Operating condition

  • Altitude : 0 to 5,000m above sea level, Wind : 15m/sec Temperature : -10 to 50deg C, Humidity : 0 to 95%RH, non-dew

Resistance features*2

  • Shock : 76cm (30inch) all surface drop Dust : Exposure to dust (0.1 to 500μm dia Alumina Silicate), IP5X Rain : H=10mm/hr for 10min, IPX2

Other features

  • PC software upgrade / data management

Terminals

  • USB 2.0 (Mini-B type) connector for PC communication. 6-pin Mini-DIN connector for RS02 or RS03 power supply.
Description

Available to Rent!

The Fujikura 70S+ is the world’s fastest and most robust core alignment fusion splicer. Incorporating the proven ruggedized features pioneered by Fujikura, the 70S+ has added automated and enhanced user control features to increase splicing efficiency. A user-programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splicing process and opening upon splice completion. Fully programmable “auto open sheath clamps” open one or both sheath clamps, after the tensile test, to prepare the fiber for removal. A new automated “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 13-second shrink time. The result is a total splice process time of approximately 21 seconds! Ruggedness and durability are greatly enhanced by a mirror-less optical system and a "severe-impact resistant" monitor. Battery capacity is now 200 splices/shrinks.

An innovative transit case doubles as a built-in or mobile workstation and makes splicing easier than ever before. In an industry first, the 70S+ is also equipped with Bluetooth®

Features:

  • Automated Wind-Protector
  • Minimum manual operation, Splice in 4 steps
  • Multi-functional carrying case with the integrated work system
  • Absolute robustness
  • Bluetooth capability connection