Close
You have no items in your shopping cart.

Teseq SL 50 Strip Line

Manufacturer part number: SL-50
The transversal electromagnetic mode which can be developped in the SL 50 strip line, provides the opportunity for doing EMC testing inside the strip line. The geometrical dimensions having a line impedance of Z = 50 Ω. At the end is required a 50 Ω termination.
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

The transversal electromagnetic mode which can be developped in the SL 50 strip line, provides the opportunity for doing EMC testing inside the strip line. The geometrical dimensions having a line impedance of Z = 50 Ω. At the end is required a 50 Ω termination.


Typical for this strip line is the low power request for high field strength values. The strip line is specified in ISO 11452-5 ‘Road Vehicles electrical disturbances through radiated narrow-band electromagnetic energy: Measurement procedure for components part 5: Strip Line’. The SL 50 allows testing electrical/electronic sub modules (EUB) and their associated cables.

  • Frequency Range: 10 kHz to 1000 MHz
  • Max. Input Power: 1000 W
  • Connector Type: N, 50 Ω female
  • Typical Impedance: 50 Ω
  • Typical VSWR (30 - 1000 MHz): 1:1.3
  • Typical CW Input Power for 10 V/m: 0.1 W (20 dBm)
  • Net Power for 10 V/m as Calculated According to ISO 11452-5: 0.045 W (16.5 dBm)
  • Distance Between the Plates: 150 mm
  • Dimentions (without options): 4.3 m x 1.5 m x 0.17 m
  • Environment: Indoor
  • IEC/EN 61000-4-20
  • CISPR 25
  • ISO 11452-5
Description

The transversal electromagnetic mode which can be developped in the SL 50 strip line, provides the opportunity for doing EMC testing inside the strip line. The geometrical dimensions having a line impedance of Z = 50 Ω. At the end is required a 50 Ω termination.


Typical for this strip line is the low power request for high field strength values. The strip line is specified in ISO 11452-5 ‘Road Vehicles electrical disturbances through radiated narrow-band electromagnetic energy: Measurement procedure for components part 5: Strip Line’. The SL 50 allows testing electrical/electronic sub modules (EUB) and their associated cables.

Product tags