Close
You have no items in your shopping cart.

Megger SMRT410 Relay Test System

Manufacturer part number: SMRT410
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

The SMRT410D is a multipurpose, light-weight, field portable test set capable of testing a wide variety of electro-mechanical, solid state and microprocessor-based protective relays, motor overload relays, and similar protective devices.

The unit can be operated either manually via the built-in touchscreen user interface (STVI), or placed under full computer control via the RTMS, Relay Test Management Software, running on a PC. In addition, with the open communication architecture, the unit can also be used with third-party software programs such as National Instruments LabVIEW™.

The built-in user interface, called the Smart Touch-View Interface™ (STVI), is Megger’s second generation of automatic / semi-automatic manual user interface software. It incorporates a large, easy to read full color, high resolution, high definition, TFT LCD touch-screen display, which displays metered values such as AC and DC Amperes, AC and DC Volts, and Time in both seconds and cycles. Depending on the type of test selected, other values may be displayed, such as Phase Angle, Frequency, Ohms, Watts, VA, or Power Factor.

Features:

  • Integrated Smart Touch View Interface.
  • Multi-colored graphics with intuitive navigation
  • Stand-alone operation, no PC required to operate
  • High current output - 60 Amps at 300 VA per phase
  • Flexible output design provides up to 10 currents
  • Dynamic, Transient and GPS Satellite Synchronized End-to- End Testing Capability
  • IEC 61850 Testing Capability

Input Power

  • 90 to 260 Volts (± 10%) AC, 1Ø, 50/60 Hz, 1800 VA

Outputs2

  • All outputs are independent from sudden changes in mains voltage and frequency, and are regulated so changes in load impedance do not affect the output. All amplifier outputs are isolated or floating. The SMRT units can be ordered with the amplifier common returns tied to chassis ground as an option.

Output Current Sources

  • The SMRT410 with five modules can provide up to ten current sources; six high current/high power3, and four convertible channels providing lower current/high power. The per channel output current and power ratings are specified in AC rms values and peak power ratings.

Output Current

  • 1 Ampere
  • 4 Amperes
  • 15 Amperes
  • 32 Amperes
  • 60 Amperes
  • DC 200 Watts
  • Power
  • 600 VA (848 Peak)

Max V/Duty Cycle

  • 50.0 Vrms Continuous
  • 13.4Vrms Continuous
  • 6.67Vrms Continuous
  • 5.00 Vrms 1.5 Sec

With two currents in series:

  • The compliance voltage doubles to provide 4.0 Amperes at 100 Volts rms up to 32A at 13 Vrms.

  • Power Cord
  • Ethernet Cable (7 ft.)
  • Instruction Manual CD
Description

The SMRT410D is a multipurpose, light-weight, field portable test set capable of testing a wide variety of electro-mechanical, solid state and microprocessor-based protective relays, motor overload relays, and similar protective devices.

The unit can be operated either manually via the built-in touchscreen user interface (STVI), or placed under full computer control via the RTMS, Relay Test Management Software, running on a PC. In addition, with the open communication architecture, the unit can also be used with third-party software programs such as National Instruments LabVIEW™.

The built-in user interface, called the Smart Touch-View Interface™ (STVI), is Megger’s second generation of automatic / semi-automatic manual user interface software. It incorporates a large, easy to read full color, high resolution, high definition, TFT LCD touch-screen display, which displays metered values such as AC and DC Amperes, AC and DC Volts, and Time in both seconds and cycles. Depending on the type of test selected, other values may be displayed, such as Phase Angle, Frequency, Ohms, Watts, VA, or Power Factor.

Features:

  • Integrated Smart Touch View Interface.
  • Multi-colored graphics with intuitive navigation
  • Stand-alone operation, no PC required to operate
  • High current output - 60 Amps at 300 VA per phase
  • Flexible output design provides up to 10 currents
  • Dynamic, Transient and GPS Satellite Synchronized End-to- End Testing Capability
  • IEC 61850 Testing Capability