Close
You have no items in your shopping cart.

Sunsight Instruments MW15 Microwave Path Alignment Tool

Manufacturer part number: 1015
The system automatically calculates exact alignment requirements in real-time and provides the user simple targets for aligning the link. No additional software, post-processing, or cables are required.
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

OPTIONS
NamePurchase
IP68 Sunsight Rugged Tablets$0.00
4G Large Display Smartphone$0.00

Sunsight Instruments AAT-15 Antenna Alignment Tool

The AntennAlign® Alignment Tool is the lightest and most accurate antenna alignment tool used during equipment installation or antenna position audits. It measures antenna alignment in azimuth, tilt, and roll while also indicating its height above ground level. The AAT features a quick capture feature for on-site captures if antenna position data not available prior to the climb. Get antenna installs right the first time, eliminate costly site re-visits or re-climbs. The AAT has the best cost of ownership saving you time and money over the long life of the product. It is the most durable AAT on the market, with its powder-coated aluminum housing, it is weatherproof and rugged for tough conditions General Contractors work in.

The antenna alignment tool is simple to operate and can mount to any antenna locations. In seconds, a person can take a reading from any wifi-enabled device, instantly creating a permanent record of an antenna alignment for accountability and traceability. Desired equipment position can be input prior to climb or entered into the tool on-site. The report records the final alignment specification, including latitude/longitude, azimuth, tilt, height, and current date and time. Records can be downloaded (via PDF or CSV) at a later time to be used by contracting companies or quality control departments to certify the installation work was performed as specified.

Key Features of the MW15 Microwave Path Alignment Kit:

  • All-inclusive MW Kit includes two alignment units to allow simultaneous alignment of both sides of the link in minutes.
  • The MW units can be used independently to align one end of the link at a time which creates flexible installation schedules for customers.
  • MW Kit can be used for microwave path alignment or configured for use as two independent RF cellular antenna panel alignment systems with no additional hardware or software, making the MW15 an all-in-one alignment system for microwave and RF panel alignment.
  • MW Kit software determines the required path alignment automatically (target azimuth and elevation) which eliminates problems from data entry, incorrect path data sheets, or changing antenna locations.
  • Frequency and distance are independent.
  • Azimuth, elevation, height, and location (Lat/Long) are captured into reports for customer and government communication agency records.
  • Designed with standard mounting points to facilitate creating custom mounting solutions.
  • Has the flexibility to support customer requirements for custom software and packaging of the product.
  • Reduces climber fatigue and time on the tower. Faster and safer.
  • Intuitive use of the kit. Both climbers are presented with target and actual alignment values and are able to view the remote end’s alignment progress as well.
  • Field Proven Toughness: solid powder-coated aluminum housing, weather-resistant (IP65).
  • Measures AGL height if required (with laser rangefinder option).
  • MW unit calibration can be done in the field by the user in less than 2 minutes.
Accuracy:
  • Azimuth R99*: .45°
  • Azimuth RMS*: .15°
  • Tilt/Roll: .1°
  • Horizontal Position: 30 cm (SBAS)
  • Vertical Position (MSL): 60 cm (SBAS)
  • Altitude With LRF: 21 cm (AGL)
  • GPS Receiver: 540 channel
  • Satellite Constellations: GPS and GLONASS
Battery:
  • Type: LiFePO4
  • Life: 9 hrs
  • Charge Time: 1.5 hrs
Weight:
  • Unit: 4.5 lbs
  • Mount: 4 lbs
  • Unit Dimensions: 22.7"x3.8"x1.7" (57.6cmx9.6cmx4.3cm)
Environment and Connectivity:
  • Op Temp: -40°C to 70°C
  • Storage Temp: -40°C to 85°C
  • Humidity: 95%
  • Communications: 802.11b,g,n
  • Output: PDF, CSV, HTML, Proprietary encrypted format
  • Memory: 8 GB
  • Industry Certifications: CE and FCC
  • MW15 Aligner (2)
  • Hard Carrying Case
  • Mount – PN 2150 (2)
  • IP68 Sunsight Rugged Tablet (2)
  • Shielded Microwave Mount (2)

Description

Sunsight Instruments AAT-15 Antenna Alignment Tool

The AntennAlign® Alignment Tool is the lightest and most accurate antenna alignment tool used during equipment installation or antenna position audits. It measures antenna alignment in azimuth, tilt, and roll while also indicating its height above ground level. The AAT features a quick capture feature for on-site captures if antenna position data not available prior to the climb. Get antenna installs right the first time, eliminate costly site re-visits or re-climbs. The AAT has the best cost of ownership saving you time and money over the long life of the product. It is the most durable AAT on the market, with its powder-coated aluminum housing, it is weatherproof and rugged for tough conditions General Contractors work in.

The antenna alignment tool is simple to operate and can mount to any antenna locations. In seconds, a person can take a reading from any wifi-enabled device, instantly creating a permanent record of an antenna alignment for accountability and traceability. Desired equipment position can be input prior to climb or entered into the tool on-site. The report records the final alignment specification, including latitude/longitude, azimuth, tilt, height, and current date and time. Records can be downloaded (via PDF or CSV) at a later time to be used by contracting companies or quality control departments to certify the installation work was performed as specified.

Key Features of the MW15 Microwave Path Alignment Kit:

  • All-inclusive MW Kit includes two alignment units to allow simultaneous alignment of both sides of the link in minutes.
  • The MW units can be used independently to align one end of the link at a time which creates flexible installation schedules for customers.
  • MW Kit can be used for microwave path alignment or configured for use as two independent RF cellular antenna panel alignment systems with no additional hardware or software, making the MW15 an all-in-one alignment system for microwave and RF panel alignment.
  • MW Kit software determines the required path alignment automatically (target azimuth and elevation) which eliminates problems from data entry, incorrect path data sheets, or changing antenna locations.
  • Frequency and distance are independent.
  • Azimuth, elevation, height, and location (Lat/Long) are captured into reports for customer and government communication agency records.
  • Designed with standard mounting points to facilitate creating custom mounting solutions.
  • Has the flexibility to support customer requirements for custom software and packaging of the product.
  • Reduces climber fatigue and time on the tower. Faster and safer.
  • Intuitive use of the kit. Both climbers are presented with target and actual alignment values and are able to view the remote end’s alignment progress as well.
  • Field Proven Toughness: solid powder-coated aluminum housing, weather-resistant (IP65).
  • Measures AGL height if required (with laser rangefinder option).
  • MW unit calibration can be done in the field by the user in less than 2 minutes.