Close
You have no items in your shopping cart.
Search

VIAVI Solutions T-BERD 5800 Handheld Network Tester- QUADC

Manufacturer part number: CPRI-QUADC
The configurable T-BERD 5800 is the industry's smallest dual 10 G handheld instrument for Ethernet, SONET, SDH, OTN, Fiber Channel, and CPRI/OBSAI testing. BBU Emulation.
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

IN STOCK and available to RENT!

The T-Berd 5800 handheld network tester is the one tool that network technicians and engineers need to install, turn-up, and maintain their networks. It supports both the legacy and emerging technologies required to handle various network applications including metro/core, mobile backhaul, and business services installations. The industry’s smallest handheld instrument can test throughout the service lifecycle, including fiber characterization, service activation, troubleshooting, and maintenance. Advanced Ethernet test features such as TrueSpeed per RFC 6349, J-Profiler™, Wirespeed capture/decode, and automated J-Mentor, help field technicians test their networks faster and more accurately than ever before.

Benefits:

  • Simplifies multi-technology testing with an all-in-one dual-10 G handheld
  • Optimized for field use with a multitouch screen, scripted workflows, and clear results
  • Supports efficient best practices with repeatable methods and procedures
  • Speeds fiber characterization, Ethernet service activation, and troubleshooting tests
  • Empowers cell-site technicians to easily install and maintain back haul and front haul networks
  • Avoid costly and dangerous tower climbs

Features:

  • Fully-loaded TDM/PDH to dual 10 G Ethernet, SONET, SDH, Fiber Channel, and OTN support
  • Automated, enhanced RFC 2544 and SAMComplete testing per ITU-T Y.1564
  • Integrated burst testing approach per MEF 34 and RFC 6349 TrueSpeed™TCP throughput testing
  • Integrated Timing/Synchronization testing including PTP/1588v2, SyncE, Wander, and One Way Delay test
  • Fronthaul Testing CPRI/OBSAI Layer 1/Layer 2 and emulation of Baseband and Remote Radio units
  • Single- and dual-port versions
  • Compatible with VIAVI 4100-Series OTDR modules and Smart Link Mapper™, fiber microscopes, and optical power meters - Learn more about OTDR Testing
  • BBU emulation
  • RFoCPRI

Applications:

  • Mobile and backhaul characterization, validation, and troubleshooting
  • Converged Ethernet/IP network testing and troubleshooting at 10 Mbps to 10 G interfaces
  • Fiber link characterization and troubleshooting
  • Installation and maintenance of OTN and legacy SONET/SDH and TDM/PDH networks
  • Remote radio head (RRH) testing at the wireless base station

Compatible with JDSU Fiber Test Tools:

Mobility, business services, and metro technicians can now test virtually any interface in their network as well as qualify fiber plant with one ultra-portable instrument. The T-Berd 5800 is compatible with:

  • MP-Series optical power meters for optical power and loss measurements
  • OTDR modules for fiber link characterization and fault finding
  • Smart Link Mapper optical analysis software that displays OTDR results in a simple, icon-based map view for clear diagnostics of the detected issue
  • OTDR: SM&MM 850/1300/1310/1550nm
  • Light Source Option for OTDR Plug-Ins
  • TB/MTS-5811P; Single 10G W/PDH (mainframe)
  • TB/MTS 5800 2.4G CPRI Test Opt. Software
  • TB/MTS 5800 3G CPRI Test Opt. Software
  • TB 5800 9.8G - Layer 1/2 - CPRI Test w/ Patterns
  • 600M CPRI Software
  • 1.2G CPRI Software
  • TB/MTS 5800 10.137G Optical BERTTest Option
  • TB/MTS 5800 Bluetooth Test Opt. Software
  • TB/MTS 5800 WiFi Option Software
  • TB/MTS 5800V2 4PT9G CPRI Test Option
  • C561GCPRI; TB/MTS5800v2 6.1G CPRI Test Option
  • SMARTFTTA OTDR SW Option for TB5800
  • Soft Carrying Case for TB5800
  • Power Adapter/Charger for TB5800
  • Cable:  EXTCLK (IN) adapter cable
  • CB-016267; Ethernet Regular RJ-45
  • 7.2 V Lithium-Ion Battery
  • STYLUS
  • MP-60: USB Power Meter
  • Softcase for MP60 Power Meter
  • FITP-UPP12 Adapter for MP60
  • USB cable extender for MP series OPM
  • Visual Fault Locator w/ softcase
  • FFL-050-U12 Adapter for Visual Fault Locator
  • P5000i Digital Analysis Microscope w/ FiberChekPRO
  • Probe Tip: Universal 2.5mm (for FBP probe)
  • FBPT-LC; Tip LC Bulkhead for FBP
  • FBPT-SC; Tip SC Bulkhead for FBP
  • FBPT-U12M; Tip Universal 1.25mm Patch Cord for FBP
  • ZP-PKG-0282; Small Tip Case With Foam
  • ZP-PKG-0511; Sm. Shoulder Bag (Probe Carrying Case)
  • ZP-FM-0055; FBP Probe Pouch
  • ZP-PKG-0574; QuickStart Guide For FiberChekPRO
  • SW-FCM-A1; Activation Key P5000i Android Device
  • LC Singlemode Mating Sleeve
  • 10M SM Patchcord LC/PC to LC/PC
  • 10m MM (50/125UM) Patchcord LC/PC to LC/PC
  • LCPC and LCAPC Non-Reflective Optical Terminators
  • SM UNIVERSAL PC/LC CONNECTOR, attached to bulkhead
  • MM UNIVERSAL PC/LC CONNECTOR, attached to bulkhead
  • 3 Prong Power Adapter Cord, North America
  • BNC(f) to SMA(m) adapter

  • All test interfaces are readily available
  • Compact form factor for easy portability: 7x9.5x3in (17.8x24.1x7.62cm)
  • Large 7-inch multi-touch display
  • Tablet-like interface for easy navigation through test information and advanced workflows
  • Integrated WiFi and Bluetooth lets you easily connect test sets and offload results
  • Fixed test interfaces eliminate loose pluggable modules
  • LEDs indicate plug-ins for tests
  • A streamlined user interface provides simple pass/fail, green/red results
  • Extended battery life enables longer test times
  • Boots up rapidly from power-on to test start
  • Dual-port operation runs two tests simultaneously, including 10 G/high-speed test
  • Network discovery automatically identifies equipment present on the network
  • J-Profiler discovers live traffic streams for real-time troubleshooting with in-service top-talkers analysis
  • Integrated capture/decode offers 10 G line-rate packet capture and analysis in a handheld
  • J-Mentor provides expert troubleshooting guidance and interprets packet decode

Cell-Site Capabilities

  • When equipped with an OTDR module, the T-BERD/MTS-5800 is the perfect solution for mobile network testing, providing easy fiber link characterization and troubleshooting.
  • Validate C-RAN connectivity across CWDM networks
  • Test RRH health from the bottom of the tower by emulating a BBU
  • Gain crucial visibility into system health with monitoring and inline access
  • Verify network synchronization: Emulate a 1588v2 master clock/slave recovery for proper point-to-point (PTP) message propagation and packet-delay variation (PDV) verification
  • Verify SyncE frequency synchronization accuracy and Ethernet synchronization message channel (ESMC) message propagation
  • Measure wander on SyncE, 1PPS, T1, E1, and 2 and 10MHz signals
  • BBU Emulation
  • CPRI/OBSAI
  • IEEE 1588v2 PTP
  • IETF RFC 6349
  • ITU-T Y.1564
  • RFC 2544

Description

IN STOCK and available to RENT!

The T-Berd 5800 handheld network tester is the one tool that network technicians and engineers need to install, turn-up, and maintain their networks. It supports both the legacy and emerging technologies required to handle various network applications including metro/core, mobile backhaul, and business services installations. The industry’s smallest handheld instrument can test throughout the service lifecycle, including fiber characterization, service activation, troubleshooting, and maintenance. Advanced Ethernet test features such as TrueSpeed per RFC 6349, J-Profiler™, Wirespeed capture/decode, and automated J-Mentor, help field technicians test their networks faster and more accurately than ever before.

Benefits:

  • Simplifies multi-technology testing with an all-in-one dual-10 G handheld
  • Optimized for field use with a multitouch screen, scripted workflows, and clear results
  • Supports efficient best practices with repeatable methods and procedures
  • Speeds fiber characterization, Ethernet service activation, and troubleshooting tests
  • Empowers cell-site technicians to easily install and maintain back haul and front haul networks
  • Avoid costly and dangerous tower climbs

Features:

  • Fully-loaded TDM/PDH to dual 10 G Ethernet, SONET, SDH, Fiber Channel, and OTN support
  • Automated, enhanced RFC 2544 and SAMComplete testing per ITU-T Y.1564
  • Integrated burst testing approach per MEF 34 and RFC 6349 TrueSpeed™TCP throughput testing
  • Integrated Timing/Synchronization testing including PTP/1588v2, SyncE, Wander, and One Way Delay test
  • Fronthaul Testing CPRI/OBSAI Layer 1/Layer 2 and emulation of Baseband and Remote Radio units
  • Single- and dual-port versions
  • Compatible with VIAVI 4100-Series OTDR modules and Smart Link Mapper™, fiber microscopes, and optical power meters - Learn more about OTDR Testing
  • BBU emulation
  • RFoCPRI

Applications:

  • Mobile and backhaul characterization, validation, and troubleshooting
  • Converged Ethernet/IP network testing and troubleshooting at 10 Mbps to 10 G interfaces
  • Fiber link characterization and troubleshooting
  • Installation and maintenance of OTN and legacy SONET/SDH and TDM/PDH networks
  • Remote radio head (RRH) testing at the wireless base station

Compatible with JDSU Fiber Test Tools:

Mobility, business services, and metro technicians can now test virtually any interface in their network as well as qualify fiber plant with one ultra-portable instrument. The T-Berd 5800 is compatible with:

  • MP-Series optical power meters for optical power and loss measurements
  • OTDR modules for fiber link characterization and fault finding
  • Smart Link Mapper optical analysis software that displays OTDR results in a simple, icon-based map view for clear diagnostics of the detected issue
Product tags