Close
You have no items in your shopping cart.

IFI T186-300 TWT Microwave Power Amplifier

Manufacturer part number: T186-300
The IFI T186-300 is part of the T-300 Series of High Power TWT Amplifiers provide outstanding RF performance.
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

Instrument for Industry T186-300 High Power TWT Microwave Power Amplifier

Part of the T-300 Series High Power TWT Microwave Power Amplifiers is top performing with field proven reliability. These amplifiers include a full complement of RF and hardware protection systems including high VSWR, over-current and voltage protection. The redundant thermal and airflow sensors prevent the TWT from overheating. These amplifiers feature modular construction and this concept of modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities. It is designed for simplicity with a backlit LCD screen that shows forward/reverse power indication, status and self-diagnostic information. For computer automation, both an RS-232 and IEEE-488 interface are included.

Features: 

  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged Construction & High Reliability
  • Backlit LCD Display
  • Integrated Force Air Cooling
  • Self-diagnostic circuitry
  • IEEE-488 interface, RS232
  • Solid State Power Supply
  • Frequency Range: As Specified in Model Table
  • Rated Output Power: As Specified in Model Table
  • Gain @ Rated Power: As Specified in Model Table
  • Prime Power: As Required for Customer (Some are listed below)
  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Output Connector:Type N Female up to 8 GHz, 8-12 GHz is WR90, 12-18 GHz is WR62, 7.5-18 GHz is WRD750, 6.5-18 GHz is WRD650
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1
  • Operating Temp: 0° to 50° C
  • Non-operating Temp/Altitude: -40° to 70° C (50,000 feet max)
  • Humidity: 95% without condensation
  • Operating Altitude: 10,000 feet
  • Cooling System: Air cooled, self-contained
  • Modulation: All types, AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table, or Cabinet Integrated as needed
  • Spurious Outputs:

Standard Prime Powers:

  • 100, 115, 120 VAC ±10% 50/60 Hz, single phase
  • 200, 220, 230, 240VAC ±10% 50/60 Hz, single phase
  • 100/200VAC,115/208 or 200/220/230/240VAC ±10% 50/60 Hz, three phase Wye or Delta and/or 400 Hz power is available.
Description

Instrument for Industry T186-300 High Power TWT Microwave Power Amplifier

Part of the T-300 Series High Power TWT Microwave Power Amplifiers is top performing with field proven reliability. These amplifiers include a full complement of RF and hardware protection systems including high VSWR, over-current and voltage protection. The redundant thermal and airflow sensors prevent the TWT from overheating. These amplifiers feature modular construction and this concept of modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities. It is designed for simplicity with a backlit LCD screen that shows forward/reverse power indication, status and self-diagnostic information. For computer automation, both an RS-232 and IEEE-488 interface are included.

Features: 

  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged Construction & High Reliability
  • Backlit LCD Display
  • Integrated Force Air Cooling
  • Self-diagnostic circuitry
  • IEEE-488 interface, RS232
  • Solid State Power Supply