1400V, 100MHz is a high-voltage active differential probe that is safe and easy-to-use ideally suited for measuring power electronics. The ADP305 is designed for measuring the high-speed floating voltages found in high-speed power electronics.
Teledyne LeCroy current probes make accurate and reliable AC, DC and impulse current measurements without requiring the breaking of a circuit or the insertion of a shunt. This capability is based on a combination of Hall effect and transformer technology. Many current probes require external power supplies or amplifiers to display a waveform on the oscilloscope screen
The Teledyne LeCroy CP030A Current Probe was designed with a small form factor for crowded boards. The small jaw can probe currents in tight spaces and still clamp onto conductors up to 5mm in diameter. Continuous currents of 30Arms and peak currents of 50A can be measured by the CP030, which also features a 50MHz bandwidth.
The Teledyne LeCroy DA1855A is a stand-alone, high-performance 100MHz differential amplifier. It is intended to act as a signal conditioning preamplifier for oscilloscopes, digitizers and spectrum analyzers, providing differential measurement capability to instruments having only a single-ended input.
The MS Series offers unmatched digital performance and is available in two models, the MS-500 and MS-250. Designed to capture long records of the fastest digital signals the MS-500 has a maximum input frequency of 500 MHz, while other MSOs are limited to only 250 MHz.
The PPE series of probes are suitable for a wide range of applications where high-voltage measurements must be made safely and accurately. There are five fixed-attenuation probes covering a range from 2 kV to 20 kV, and one switchable probe providing ÷10/÷100 attenuation for voltage inputs up to 1.2 kV. New technology which utilizes hybrid circuitry (and switch reading for probes with switchable gain/attenuation) minimizes ringing and overshoot to provide a precise response.
The Teledyne LeCroy WaveJet 314A Oscilloscope 100 MHz, 4 Ch, 2 GS/s provides the banner specifications, feature set and user interface to simplify how you work and shorten debug time. With a big, bright 7.5” display, long 500 kpts/Ch memory and up to 2 GS/s you will easily capture and see every detail of your waveform.